Micrel PHY KSZ8001 on MPC5200B FEC

[Grant Likely]

On Tue, Oct 27, 2009 at 1:54 PM, Roman Fietze
<roman.fietze at telemotive.de> wrote:
> Hello Suvidh,
>
> On Tuesday 27 October 2009 17:47:51 suvidh kankariya wrote:
>
>> A driver for micrel phy exists in /drivers/net/phy/micrel.c. in
>> 2.6.30.
>
> Am I somewhat blind, or do you have access to other 2.6.30's than I
> have?
>
> I searched git.kernel.org, git.denx.de and git.secretlab.ca, but could
> not find that file, neither in the current master, nor in older tags
> somewhat related to "2.6.30", nor in any local clone in any version of
> the 2.6 since "He" created the repos.

No, there is a marvell driver, but not a micrel one.  If the generic
phy driver doesn't work for you, then yes, add a new micrel driver.
To hook it up to the MPC5200 FEC, you just need to have the correct
PHY address in your board's .dts file.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.