[PATCH v3] mpc5200: support for the MAN mpc5200 based board mucmc52
Wolfram Sang
w.sang at pengutronix.de
Wed Oct 7 20:49:36 EST 2009
On Wed, Oct 07, 2009 at 08:40:37AM +0200, Heiko Schocher wrote:
> - serial Console on PSC1
> - 64MB SDRAM
> - MTD CFI Flash
> - Ethernet FEC
> - IDE support
>
> Signed-off-by: Heiko Schocher <hs at denx.de>
Sorry for finding things incrementally, but I think there is still one issue
left. Once this is sorted out, you could add my:
Reviewed-by: Wolfram Sang <w.sang at pengutronix.de>
> ---
>
> - based on:
> git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
>
> - checked with:
> $ ./scripts/checkpatch.pl 0002-mpc5200-support-for-the-MAN-mpc5200-based-board-muc.patch
> total: 0 errors, 0 warnings, 361 lines checked
>
> 0002-mpc5200-support-for-the-MAN-mpc5200-based-board-muc.patch has no obvious style problems and is ready for submission.
> $
>
> changes since v1:
>
> - add comments from Grant Likely <grant.likely at secretlab.ca>
> use mpc5200_defconfig as default configuration, therefore added
> SIMPLE_GPIO support in it, because this is not selectable as a
> module.
> - add comments from Wolfram Sang <w.sang at pengutronix.de>
> - rebase against current next
>
> changes since v2:
> - add comment from Wolfram Sang
> remove unofficial binding
>
> arch/powerpc/boot/dts/mucmc52.dts | 346 ++++++++++++++++++++++++++
> arch/powerpc/configs/mpc5200_defconfig | 2 +-
> arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
> 3 files changed, 348 insertions(+), 1 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/mucmc52.dts
>
> diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
> new file mode 100644
> index 0000000..3924811
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mucmc52.dts
> @@ -0,0 +1,346 @@
> +/*
> + * mucmc52 board Device Tree Source
> + *
> + * Copyright (C) 2009 DENX Software Engineering GmbH
> + * Heiko Schocher <hs at denx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + model = "manroland,mucmc52";
> + compatible = "manroland,mucmc52";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&mpc5200_pic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + PowerPC,5200 at 0 {
> + device_type = "cpu";
> + reg = <0>;
> + d-cache-line-size = <32>;
> + i-cache-line-size = <32>;
> + d-cache-size = <0x4000>; // L1, 16K
> + i-cache-size = <0x4000>; // L1, 16K
> + timebase-frequency = <0>; // from bootloader
> + bus-frequency = <0>; // from bootloader
> + clock-frequency = <0>; // from bootloader
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x04000000>; // 64MB
> + };
> +
> + soc5200 at f0000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,mpc5200-immr",
> + "fsl,mpc5200b-immr";
You should decide on the latter one only here.
> + ranges = <0 0xf0000000 0x0000c000>;
> + reg = <0xf0000000 0x00000100>;
> + bus-frequency = <0>; // from bootloader
> + system-frequency = <0>; // from bootloader
> +
> + cdm at 200 {
> + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> + reg = <0x200 0x38>;
> + };
> +
> + mpc5200_pic: interrupt-controller at 500 {
> + // 5200 interrupts are encoded into two levels;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> + reg = <0x500 0x80>;
> + interrupts = <0 0 3>;
> + };
> +
> + gpt0: timer at 600 { // GPT 0 in GPIO mode
> + compatible = "fsl,mpc5200b-gpt-gpio",
> + "fsl,mpc5200-gpt-gpio";
> + #gpio-cells = <2>;
> + reg = <0x600 0x10>;
> + interrupts = <1 9 0>;
> + gpio-controller;
> + };
> +
> + gpt1: timer at 610 { // GPT 1 in GPIO mode
> + compatible = "fsl,mpc5200b-gpt-gpio",
> + "fsl,mpc5200-gpt-gpio";
> + #gpio-cells = <2>;
> + reg = <0x610 0x10>;
> + interrupts = <1 10 0>;
> + gpio-controller;
> + };
> +
> + gpt2: timer at 620 { // GPT 2 in GPIO mode
> + compatible = "fsl,mpc5200b-gpt-gpio",
> + "fsl,mpc5200-gpt-gpio";
> + #gpio-cells = <2>;
> + reg = <0x620 0x10>;
> + interrupts = <1 11 0>;
> + gpio-controller;
> + };
> +
> + gpt3: timer at 630 { // GPT 3 in GPIO mode
> + compatible = "fsl,mpc5200b-gpt-gpio",
> + "fsl,mpc5200-gpt-gpio";
> + #gpio-cells = <2>;
> + reg = <0x630 0x10>;
> + interrupts = <1 12 0>;
> + gpio-controller;
> + };
> +
> + gpio_simple: gpio at b00 {
> + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> + #gpio-cells = <2>;
> + reg = <0xb00 0x40>;
> + interrupts = <1 7 0>;
> + gpio-controller;
> + };
> +
> + gpio_wkup: gpio at c00 {
> + compatible = "fsl,mpc5200b-gpio-wkup",
> + "fsl,mpc5200-gpio-wkup";
> + #gpio-cells = <2>;
> + reg = <0xc00 0x40>;
> + interrupts = <1 8 0 0 3 0>;
> + gpio-controller;
> + };
> +
> + dma-controller at 1200 {
> + device_type = "dma-controller";
> + compatible = "fsl,mpc5200b-bestcomm",
> + "fsl,mpc5200-bestcomm";
> + reg = <0x1200 0x80>;
> + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> + 3 4 0 3 5 0 3 6 0 3 7 0
> + 3 8 0 3 9 0 3 10 0 3 11 0
> + 3 12 0 3 13 0 3 14 0 3 15 0>;
> + };
> +
> + xlb at 1f00 {
> + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> + reg = <0x1f00 0x100>;
> + };
> +
> + serial at 2000 { // PSC1
> + compatible = "fsl,mpc5200b-psc-uart",
> + "fsl,mpc5200-psc-uart";
> + reg = <0x2000 0x100>;
> + interrupts = <2 1 0>;
> + };
> +
> + serial at 2200 { // PSC2
> + compatible = "fsl,mpc5200b-psc-uart",
> + "fsl,mpc5200-psc-uart";
> + reg = <0x2200 0x100>;
> + interrupts = <2 2 0>;
> + };
> +
> + serial at 2c00 { // PSC6
> + compatible = "fsl,mpc5200b-psc-uart",
> + "fsl,mpc5200-psc-uart";
> + reg = <0x2c00 0x100>;
> + interrupts = <2 6 0>;
> + };
> +
> + ethernet at 3000 {
> + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> + reg = <0x3000 0x400>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + interrupts = <2 5 0>;
> + phy-handle = <&phy0>;
> + };
> +
> + mdio at 3000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> + reg = <0x3000 0x400>; // fec range, since we need to
> + // setup fec interrupts
> + interrupts = <2 5 0>; // these are for "mii command
> + // finished", not link changes
> + // & co.
> +
> + phy0: ethernet-phy at 0 {
> + compatible = "intel,lxt971";
> + reg = <0>;
> + };
> + };
> +
> + ata at 3a00 {
> + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> + reg = <0x3a00 0x100>;
> + interrupts = <2 7 0>;
> + };
> +
> + i2c at 3d40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c",
> + "fsl-i2c";
> + reg = <0x3d40 0x40>;
> + interrupts = <2 16 0>;
> +
> + hwmon at 2c {
> + compatible = "ad,adm9240";
> + reg = <0x2c>;
> + };
> + rtc at 51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> + };
> +
> + sram at 8000 {
> + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> + reg = <0x8000 0x4000>;
> + };
> + };
> +
> + localbus {
> + compatible = "fsl,mpc5200b-lpb","simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0 0xff800000 0x00800000
> + 1 0 0x80000000 0x00800000
> + 3 0 0x80000000 0x00800000>;
> +
> + flash at 0,0 {
> + compatible = "cfi-flash";
> + reg = <0 0 0x00800000>;
> + bank-width = <4>;
> + device-width = <2>;
> + #size-cells = <1>;
> + #address-cells = <1>;
> + partition at 0 {
> + label = "DTS";
> + reg = <0x0 0x00100000>;
> + };
> + partition at 100000 {
> + label = "Kernel";
> + reg = <0x100000 0x00200000>;
> + };
> + partition at 300000 {
> + label = "RootFS";
> + reg = <0x00300000 0x00200000>;
> + };
> + partition at 500000 {
> + label = "user";
> + reg = <0x00500000 0x00200000>;
> + };
> + partition at 700000 {
> + label = "U-Boot";
> + reg = <0x00700000 0x00040000>;
> + };
> + partition at 740000 {
> + label = "Env";
> + reg = <0x00740000 0x00020000>;
> + };
> + partition at 760000 {
> + label = "red. Env";
> + reg = <0x00760000 0x00020000>;
> + };
> + partition at 780000 {
> + label = "reserve";
> + reg = <0x00780000 0x00080000>;
> + };
> + };
> +
> + simple100: gpio-controller-100 at 3,600100 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600100 0x1>;
> + gpio-controller;
> + };
> + simple104: gpio-controller-104 at 3,600104 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600104 0x1>;
> + gpio-controller;
> + };
> + simple200: gpio-controller-200 at 3,600200 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600200 0x1>;
> + gpio-controller;
> + };
> + simple201: gpio-controller-201 at 3,600201 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600201 0x1>;
> + gpio-controller;
> + };
> + simple202: gpio-controller-202 at 3,600202 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600202 0x1>;
> + gpio-controller;
> + };
> + simple203: gpio-controller-203 at 3,600203 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600203 0x1>;
> + gpio-controller;
> + };
> + simple204: gpio-controller-204 at 3,600204 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600204 0x1>;
> + gpio-controller;
> + };
> + simple206: gpio-controller-206 at 3,600206 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600206 0x1>;
> + gpio-controller;
> + };
> + simple207: gpio-controller-207 at 3,600207 {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x00600207 0x1>;
> + gpio-controller;
> + };
> + simple20f: gpio-controller-20f at 3,60020f {
> + #gpio-cells = <2>;
> + compatible = "manroland,mucmc52-aux-gpio";
> + reg = <3 0x0060020f 0x1>;
> + gpio-controller;
> + };
> +
> + };
> +
> + pci at f0000d00 {
> + #interrupt-cells = <1>;
> + #size-cells = <2>;
> + #address-cells = <3>;
> + device_type = "pci";
> + compatible = "fsl,mpc5200-pci";
> + reg = <0xf0000d00 0x100>;
> + interrupt-map-mask = <0xf800 0 0 7>;
> + interrupt-map = <
> + /* IDSEL 0x10 */
> + 0x8000 0 0 1 &mpc5200_pic 0 3 3
> + 0x8000 0 0 2 &mpc5200_pic 0 3 3
> + 0x8000 0 0 3 &mpc5200_pic 0 2 3
> + 0x8000 0 0 4 &mpc5200_pic 0 1 3
> + >;
> + clock-frequency = <0>; // From boot loader
> + interrupts = <2 8 0 2 9 0 2 10 0>;
> + bus-range = <0 0>;
> + ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
> + 0x02000000 0 0x90000000 0x90000000 0 0x10000000
> + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
> + };
> +};
> diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
> index aaa4416..d035421 100644
> --- a/arch/powerpc/configs/mpc5200_defconfig
> +++ b/arch/powerpc/configs/mpc5200_defconfig
> @@ -205,7 +205,7 @@ CONFIG_RTAS_PROC=y
> CONFIG_PPC_BESTCOMM=y
> CONFIG_PPC_BESTCOMM_ATA=y
> CONFIG_PPC_BESTCOMM_FEC=y
> -# CONFIG_SIMPLE_GPIO is not set
> +CONFIG_SIMPLE_GPIO=y
>
> #
> # Kernel options
> diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> index caf6d92..d45be5b 100644
> --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
> +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> @@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void)
> /* list of the supported boards */
> static char *board[] __initdata = {
> "intercontrol,digsy-mtc",
> + "manroland,mucmc52",
> "manroland,uc101",
> "phytec,pcm030",
> "phytec,pcm032",
> --
> 1.6.0.6
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20091007/77587f48/attachment-0001.pgp>
More information about the Linuxppc-dev
mailing list