swiotlb: Introduce architecture-specific APIs to replace __weak functions
Ian Campbell
Ian.Campbell at eu.citrix.com
Fri May 29 19:06:23 EST 2009
Subject should have been "swiotlb: Introduce architecture-specific APIs
to replace __weak functions". Seems I never drive git send-email right
first time...
On Fri, 2009-05-29 at 04:43 -0400, Ian Campbell wrote:
> This series does not contain any Xen or PowerPC specific changes, those
> will follow in separate postings.
Becky, here is an updated version of your 2/3 "powerpc: Add support for
swiotlb on 32-bit" [0], compile tested with the new interfaces. The
interdiff is attached.
Ian.
[0] http://ozlabs.org/pipermail/linuxppc-dev/2009-May/072140.html
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cdc9a6f..561abf9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -296,9 +296,19 @@ config IOMMU_VMERGE
config IOMMU_HELPER
def_bool PPC64
+config SWIOTLB
+ bool "SWIOTLB support"
+ default n
+ select IOMMU_HELPER
+ ---help---
+ Support for IO bounce buffering for systems without an IOMMU.
+ This allows us to DMA to the full physical address space on
+ platforms where the size of a physical address is larger
+ than the bus address. Not all platforms support this.
+
config PPC_NEED_DMA_SYNC_OPS
def_bool y
- depends on NOT_COHERENT_CACHE
+ depends on (NOT_COHERENT_CACHE || SWIOTLB)
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb448d6..b2fcd2b 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -15,9 +15,18 @@
#include <linux/scatterlist.h>
#include <linux/dma-attrs.h>
#include <asm/io.h>
+#include <asm/swiotlb.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
+/* Some dma direct funcs must be visible for use in other dma_ops */
+extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag);
+extern void dma_direct_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+extern unsigned long get_dma_direct_offset(struct device *dev);
+
#ifdef CONFIG_NOT_COHERENT_CACHE
/*
* DMA-consistent mapping functions for PowerPCs that don't support
@@ -78,6 +87,9 @@ struct dma_mapping_ops {
dma_addr_t dma_address, size_t size,
enum dma_data_direction direction,
struct dma_attrs *attrs);
+ bool (*map_range)(struct device *dev, u64 mask,
+ phys_addr_t addr, size_t size,
+ dma_addr_t *dma_addr_p);
#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
void (*sync_single_range_for_cpu)(struct device *hwdev,
dma_addr_t dma_handle, unsigned long offset,
@@ -290,6 +302,16 @@ static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
}
+static inline bool dma_map_range(struct device *hwdev, u64 mask,
+ phys_addr_t addr, size_t size,
+ dma_addr_t *dma_addr_p)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
+
+ BUG_ON(!dma_ops);
+ return dma_ops->map_range(hwdev, mask, addr, size, dma_addr_p);
+}
+
#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
static inline void dma_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
@@ -409,6 +431,16 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
#define dma_is_consistent(d, h) (1)
#endif
+static inline dma_addr_t phys_to_dma(struct device *hwdev, phys_addr_t paddr)
+{
+ return paddr + get_dma_direct_offset(hwdev);
+}
+
+static inline phys_addr_t dma_to_phys(struct device *hwdev, dma_addr_t daddr)
+{
+ return daddr + get_dma_direct_offset(hwdev);
+}
+
static inline int dma_get_cache_alignment(void)
{
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
new file mode 100644
index 0000000..30891d6
--- /dev/null
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_SWIOTLB_H
+#define __ASM_SWIOTLB_H
+
+#include <linux/swiotlb.h>
+
+extern struct dma_mapping_ops swiotlb_dma_ops;
+extern struct dma_mapping_ops swiotlb_pci_dma_ops;
+
+int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
+ size_t size);
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+extern unsigned int ppc_swiotlb_enable;
+int __init swiotlb_setup_bus_notifier(void);
+
+#endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 9ba1bb7..f6d720b 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
+obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
new file mode 100644
index 0000000..ef2e812
--- /dev/null
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -0,0 +1,137 @@
+/*
+ * Contains routines needed to support swiotlb for ppc.
+ *
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/pfn.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/swiotlb.h>
+#include <asm/dma.h>
+#include <asm/abs_addr.h>
+
+int swiotlb __read_mostly;
+unsigned int ppc_swiotlb_enable;
+
+/*
+ * Determine if an address is reachable by a pci device, or if we must bounce.
+ */
+static bool
+pci_map_range(struct device *hwdev, u64 mask,
+ phys_addr_t addr, size_t size,
+ dma_addr_t *dma_addr_p)
+{
+ dma_addr_t dma_addr = phys_to_dma(hwdev, addr);
+ dma_addr_t max;
+ struct pci_controller *hose;
+ struct pci_dev *pdev = to_pci_dev(hwdev);
+
+ hose = pci_bus_to_host(pdev->bus);
+ max = hose->dma_window_base_cur + hose->dma_window_size;
+
+ /* check that we're within mapped pci window space */
+ if ((dma_addr + size > max) | (dma_addr < hose->dma_window_base_cur))
+ return false;
+
+ *dma_addr_p = dma_addr;
+ return true;
+}
+
+static bool
+map_range(struct device *dev, u64 mask,
+ phys_addr_t addr, size_t size,
+ dma_addr_t *dma_addr_p)
+{
+ dma_addr_t dma_addr = phys_to_dma(dev, addr);
+
+ if (dma_addr + size > mask)
+ return false;
+
+ *dma_addr_p = dma_addr;
+ return true;
+}
+
+
+/*
+ *@the moment, all platforms that use this code only require
+ * swiotlb to be used if we're operating on HIGHMEM. Since
+ * we don't ever call anything other than map_sg, unmap_sg,
+ * map_page, and unmap_page on highmem, use normal dma_ops
+ * for everything else.
+ */
+struct dma_mapping_ops swiotlb_dma_ops = {
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .dma_supported = swiotlb_dma_supported,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .map_range = map_range,
+ .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+ .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+struct dma_mapping_ops swiotlb_pci_dma_ops = {
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .dma_supported = swiotlb_dma_supported,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .map_range = pci_map_range,
+ .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+ .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ /* We are only intereted in device addition */
+ if (action != BUS_NOTIFY_ADD_DEVICE)
+ return 0;
+
+ /* May need to bounce if the device can't address all of DRAM */
+ if (dma_get_mask(dev) < lmb_end_of_DRAM())
+ set_dma_ops(dev, &swiotlb_dma_ops);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
+ .notifier_call = ppc_swiotlb_bus_notify,
+ .priority = 0,
+};
+
+static struct notifier_block ppc_swiotlb_of_bus_notifier = {
+ .notifier_call = ppc_swiotlb_bus_notify,
+ .priority = 0,
+};
+
+int __init swiotlb_setup_bus_notifier(void)
+{
+ bus_register_notifier(&platform_bus_type,
+ &ppc_swiotlb_plat_bus_notifier);
+ bus_register_notifier(&of_platform_bus_type,
+ &ppc_swiotlb_of_bus_notifier);
+
+ return 0;
+}
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6b02793..20a60d6 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -19,7 +19,7 @@
* default the offset is PCI_DRAM_OFFSET.
*/
-static unsigned long get_dma_direct_offset(struct device *dev)
+unsigned long get_dma_direct_offset(struct device *dev)
{
if (dev)
return (unsigned long)dev->archdata.dma_data;
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 9e1ca74..1d15424 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,6 +39,7 @@
#include <asm/serial.h>
#include <asm/udbg.h>
#include <asm/mmu_context.h>
+#include <asm/swiotlb.h>
#include "setup.h"
@@ -332,6 +333,11 @@ void __init setup_arch(char **cmdline_p)
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+#ifdef CONFIG_SWIOTLB
+ if (ppc_swiotlb_enable)
+ swiotlb_init();
+#endif
+
paging_init();
/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index c410c60..fbcca72 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -61,6 +61,7 @@
#include <asm/xmon.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
+#include <asm/swiotlb.h>
#include "setup.h"
@@ -524,6 +525,11 @@ void __init setup_arch(char **cmdline_p)
if (ppc_md.setup_arch)
ppc_md.setup_arch();
+#ifdef CONFIG_SWIOTLB
+ if (ppc_swiotlb_enable)
+ swiotlb_init();
+#endif
+
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
-------------- next part --------------
A non-text attachment was scrubbed...
Name: interdiff
Type: text/x-patch
Size: 5368 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20090529/da4444fb/attachment.bin>
More information about the Linuxppc-dev
mailing list