help with MPC8272ADS board

Landau, Bracha BLandau at nds.com
Tue May 5 16:16:28 EST 2009


I've upgraded to the latest kernel (2.6.29), and after updating the configuration the cuImage did boot.
What's the difference between the address for the early debug console for cuImage and uImage + blob?


-----Original Message-----
From: Scott Wood [mailto:scottwood at freescale.com]
Sent: Monday, May 04, 2009 7:31 PM
To: Landau, Bracha
Cc: linuxppc-dev at ozlabs.org
Subject: Re: help with MPC8272ADS board

On Sun, May 03, 2009 at 10:16:29AM +0300, Landau, Bracha wrote:
> I'm trying to get the MPC8272ADS evaluation board up and running with
> the latest versions of u-boot and Denx linux (2.6.24).

2.6.24 is nowhere near the latest version of Linux.  If you specifically want to use a Denx kernel, you're better off at eldk at denx.de -- though I'd be surprised if that's the latest they offer, either.

> I use the device tree file (mpc8272ads.dts) provided. Based on another
> post, I updated the MPC8260ADS.h file, changing OF_CPU from
> "cpu at 0<mailto:cpu at 0>" to "PowerPC,8272 at 0", because I was getting an
> error.

I'd rather change the device tree, instead.

> I tried booting both using a cuImage (cuImage.mpc8272ads) and a uImage
> with a device tree blob. Neither boot was successful, with no helpful
> information printed to the serial port.
>
> Is there any change that has to be made in order to get the board to boot?

Upgrade to the latest kernel, and if it still doesn't work try enabling the early debug console (note that the default address is currently for cuImage).

-Scott

This e-mail is confidential, the property of NDS Ltd and intended for the addressee only. Any dissemination, copying or distribution of this message or any attachments by anyone other than the intended recipient is strictly prohibited. If you have received this message in error, please immediately notify the postmaster at nds.com and destroy the original message. Messages sent to and from NDS may be monitored. NDS cannot guarantee any message delivery method is secure or error-free. Information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept responsibility for any errors or omissions in this message and/or attachment that arise as a result of transmission. You should carry out your own virus checks before opening any attachment. Any views or opinions presented are solely those of the author and do not necessarily represent those of NDS.

To protect the environment please do not print this e-mail unless necessary.

NDS Limited Registered Office: One London Road, Staines,Middlesex TW18 4EX, United Kingdom. A company registered in England and Wales Registered no. 3080780 VAT no. GB 603 8808 40-00



More information about the Linuxppc-dev mailing list