[PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver

[Anton Vorontsov]

On Sat, Mar 21, 2009 at 09:15:25AM +0900, yamazaki wrote:
> Hi 
> 
> Thank you for your reply.
> I know RICOH has PCI SD/MMC controller. But R5C807 RICOH is not the PCI device
> which is probably new product.

Ah, then it must be connected via MPC8347's localbus.

Well, then you need 2.6.29-rcX kernels, for example
http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
is suitable.

Untar it and apply the patches (they'll apply fine on that
kernel). Then you'll need some device tree additions for
your MPC8347 board, something like this:

        localbus at e0005000 {
                #address-cells = <2>;
                #size-cells = <1>;
                compatible = "fsl,mpc8347-localbus",
                             "fsl,pq2pro-localbus";
                reg = <0xe0005000 0xd8>;
                ranges = <0x1 0x0 0xf0000000 0x1000>;
		// ^^ change the 0xf0000000 to the actual address
                sdhci at 1,0 {
                        compatible = "ricoh,r5c807", "generic-sdhci";
                        reg = <0x1 0x0 0x1000>;
                        interrupts = <ricoh-interrupt-here 0x8>;
                        interrupt-parent = <&ipic>;
                        // if needed, clock-frequency = <freq-in-HZ-here>;
                };
        };

Note that I'm not sure what endiannes you'll get when connecting
the ricoh chip to the big-endinan host...

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2