[PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver

[yamazaki]

Hi 

Thank you for your reply.
I know RICOH has PCI SD/MMC controller. But R5C807 RICOH is not the PCI device
which is probably new product.

I made the "sdhci-of.c" from patch file,then I compiled it.
But is was not succeeded.
I thought the reason is the format of "the struct sdhci_of_data" is defferent from the 
kernel 2.6.28.7,
That is why I sent this question.

>Hi!
>
>On Fri, Mar 20, 2009 at 08:28:39AM +0900, yamazaki wrote:
>> Hi all,
>> 
>> I am running the Linux kernel 2.6.28.7 on my PPC8347 BRD.
>> I have to write the driver of SDHCI driver(using R5C807 RICOH). 
>
>RICOH? It should be a PCI SD/MMC controller, so you even don't
>need any patches to make it work in 2.6.28.7. Just make sure your
>.config file has following symbols enabled:
>
>CONFIG_MMC_SDHCI=y
>CONFIG_MMC_SDHCI_PCI=y
>CONFIG_MMC_RICOH_MMC=y
>
>-- 
>Anton Vorontsov
>email: cbouatmailru at gmail.com
>irc://irc.freenode.net/bd2
>_______________________________________________
>Linuxppc-dev mailing list
>Linuxppc-dev at ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-dev

----
yamazaki-seiji at jcom.home.ne.jp