[PATCH v2] powerpc/mpc52xx: add Phytec phyCORE-MPC5200B-IO board (pcm032)
Wolfram Sang
w.sang at pengutronix.de
Wed Mar 11 03:03:47 EST 2009
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
Changes since V1:
* removed defconfig
* reworked localbus node
arch/powerpc/boot/dts/pcm032.dts | 392 ++++++++++++++++++++++++++
arch/powerpc/platforms/52xx/Kconfig | 1 +
arch/powerpc/platforms/52xx/mpc5200_simple.c | 3 +-
3 files changed, 395 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/dts/pcm032.dts
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
new file mode 100644
index 0000000..0300426
--- /dev/null
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -0,0 +1,392 @@
+/*
+ * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
+ *
+ * Copyright (C) 2006-2009 Pengutronix
+ * Sascha Hauer <s.hauer at pengutronix.de>
+ * Juergen Beisert <j.beisert at pengutronix.de>
+ * Wolfram Sang <w.sang at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "phytec,pcm032";
+ compatible = "phytec,pcm032";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200 at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ soc5200 at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm at 200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller at 500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer at 600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ timer at 610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ };
+
+ gpt2: timer at 620 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer at 630 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt4: timer at 640 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt5: timer at 650 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt6: timer at 660 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt7: timer at 670 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc at 800 { // Real time clock
+ compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+ reg = <0x800 0x100>;
+ interrupts = <1 5 0 1 6 0>;
+ };
+
+ can at 900 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can at 980 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio at b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio at c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi at f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ };
+
+ usb at 1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller at 1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb at 1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ ac97 at 2000 { /* PSC1 is ac97 */
+ compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+ cell-index = <0>;
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ /* PSC2 port is used by CAN1/2 */
+
+ serial at 2400 { /* PSC3 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <2>;
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ /* PSC4 is ??? */
+
+ /* PSC5 is ??? */
+
+ serial at 2c00 { /* PSC6 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <5>;
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet at 3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio at 3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+
+ ata at 3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c at 3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ fsl5200-clocking;
+ };
+
+ i2c at 3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl5200-clocking;
+ rtc at 51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ eeprom at 52 {
+ compatible = "at24,24c32";
+ reg = <0x52>;
+ };
+ };
+
+ sram at 8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ pci at f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ 0xc000 0 0 2 &mpc5200_pic 1 1 3
+ 0xc000 0 0 3 &mpc5200_pic 1 2 3
+ 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+ 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ 0xc800 0 0 2 &mpc5200_pic 1 2 3
+ 0xc800 0 0 3 &mpc5200_pic 1 3 3
+ 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xfe000000 0x02000000
+ 1 0 0xfc000000 0x02000000
+ 2 0 0xfbe00000 0x00200000
+ 3 0 0xf9e00000 0x02000000
+ 4 0 0xf7e00000 0x02000000
+ 5 0 0xe6000000 0x02000000
+ 6 0 0xe8000000 0x02000000
+ 7 0 0xea000000 0x02000000>;
+
+ flash at 0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <4>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition at 0 {
+ label = "ubootl";
+ reg = <0x00000000 0x00040000>;
+ };
+ partition at 40000 {
+ label = "kernel";
+ reg = <0x00040000 0x001c0000>;
+ };
+ partition at 200000 {
+ label = "jffs2";
+ reg = <0x00200000 0x01d00000>;
+ };
+ partition at 1f00000 {
+ label = "uboot";
+ reg = <0x01f00000 0x00040000>;
+ };
+ partition at 1f40000 {
+ label = "env";
+ reg = <0x01f40000 0x00040000>;
+ };
+ partition at 1f80000 {
+ label = "oftree";
+ reg = <0x01f80000 0x00040000>;
+ };
+ partition at 1fc0000 {
+ label = "space";
+ reg = <0x01fc0000 0x00040000>;
+ };
+ };
+
+ sram at 2,0 {
+ compatible = "mtd-ram";
+ reg = <2 0 0x00200000>;
+ bank-width = <2>;
+ };
+
+ /*
+ * example snippets for FPGA
+ *
+ * fpga at 3,0 {
+ * compatible = "fpga_driver";
+ * reg = <3 0 0x02000000>;
+ * bank-width = <4>;
+ * };
+ *
+ * fpga at 4,0 {
+ * compatible = "fpga_driver";
+ * reg = <4 0 0x02000000>;
+ * bank-width = <4>;
+ * };
+ */
+
+ /*
+ * example snippets for free chipselects
+ *
+ * device at 5,0 {
+ * compatible = "custom_driver";
+ * reg = <5 0 0x02000000>;
+ * };
+ *
+ * device at 6,0 {
+ * compatible = "custom_driver";
+ * reg = <6 0 0x02000000>;
+ * };
+ *
+ * device at 7,0 {
+ * compatible = "custom_driver";
+ * reg = <7 0 0x02000000>;
+ * };
+ */
+ };
+};
+
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 0465e5b..75f82ab 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -24,6 +24,7 @@ config PPC_MPC5200_SIMPLE
are:
intercontrol,digsy-mtc
phytec,pcm030
+ phytec,pcm032
promess,motionpro
schindler,cm5200
tqc,tqm5200
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index d5e1471..c31e5b5 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -51,8 +51,9 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static char *board[] __initdata = {
"intercontrol,digsy-mtc",
- "promess,motionpro",
"phytec,pcm030",
+ "phytec,pcm032",
+ "promess,motionpro",
"schindler,cm5200",
"tqc,tqm5200",
NULL
--
1.5.6.5
More information about the Linuxppc-dev
mailing list