[PATCH] powerpc: Enable additional BAT registers in setup_745x_specifics()

[Gerhard Pircher]

Currently the kernel expects the additional four IBAT and DBAT registers
to be available, but doesn't enable these registers on 745x CPUs, which
have them disabled after reset. Thus set the HIGH_BAT_EN bit in HID0
register, if the corresponding MMU feature is defined.

Signed-off-by: Gerhard Pircher <gerhard_pircher at gmx.net>
---
 arch/powerpc/kernel/cpu_setup_6xx.S |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 54f767e..1e9949e 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -239,6 +239,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
 	ori	r11,r11,HID0_LRSTK | HID0_BTIC
 	oris	r11,r11,HID0_DPM at h
+BEGIN_MMU_FTR_SECTION
+	oris	r11,r11,HID0_HIGH_BAT at h
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
 BEGIN_FTR_SECTION
 	xori	r11,r11,HID0_BTIC
 END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-- 
1.5.6.5

-- 
GMX FreeDSL mit DSL 6.000 Flatrate und Telefonanschluss nur 17,95 Euro/mtl.!
http://dslspecial.gmx.de/freedsl-aktionspreis/?ac=OM.AD.PD003K11308T4569a