Please pull from 'next' branch (2.6.29)
Benjamin Herrenschmidt
benh at kernel.crashing.org
Wed Jan 14 07:59:44 EST 2009
On Tue, 2009-01-13 at 09:21 -0600, Kumar Gala wrote:
> Please pull from 'next' branch of
>
> (this is my last pull request of 'next' for 2.6.29. I would like to see
> the 'powerpc: Unify opcode definitions and support' patch go in but leave
> that for you to pull in directly).
This is really very very very late for these changes, most of them
aren't bug fixes at all...
> master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git next
>
> to receive the following updates:
>
> arch/powerpc/Kconfig | 18 +
> arch/powerpc/boot/dts/mpc8315erdb.dts | 68 ++++++
> arch/powerpc/boot/dts/mpc8377_mds.dts | 64 ++++++
> arch/powerpc/boot/dts/mpc8377_rdb.dts | 64 ++++++
> arch/powerpc/boot/dts/mpc8378_mds.dts | 64 ++++++
> arch/powerpc/boot/dts/mpc8378_rdb.dts | 64 ++++++
> arch/powerpc/include/asm/reg_booke.h | 1
> arch/powerpc/kernel/Makefile | 1
> arch/powerpc/kernel/cpu_setup_fsl_booke.S | 31 +++
> arch/powerpc/kernel/cputable.c | 8
> arch/powerpc/kernel/head_booke.h | 6
> arch/powerpc/kernel/head_fsl_booke.S | 85 +++++---
> arch/powerpc/mm/fsl_booke_mmu.c | 93 ++++-----
> arch/powerpc/platforms/83xx/Makefile | 1
> arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c | 209 +++++++++++++++++++++
> arch/powerpc/platforms/83xx/mpc831x_rdb.c | 2
> arch/powerpc/platforms/83xx/mpc837x_mds.c | 10 -
> arch/powerpc/platforms/83xx/mpc837x_rdb.c | 2
> arch/powerpc/platforms/Kconfig | 11 +
> arch/powerpc/sysdev/fsl_pci.c | 244 ++++++++++++++++++++++---
> drivers/i2c/chips/Kconfig | 11 -
> drivers/i2c/chips/Makefile | 1
> drivers/i2c/chips/mcu_mpc8349emitx.c | 209 ---------------------
> include/linux/pci_ids.h | 8
> 24 files changed, 941 insertions(+), 334 deletions(-)
>
> Anton Vorontsov (4):
> powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support
> powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E
> powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
> powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
>
> Kumar Gala (2):
> powerpc/fsl-booke: Cleanup init/exception setup to be runtime
> powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
>
> Trent Piepho (3):
> powerpc/fsl-booke: Remove code duplication in lowmem mapping
> powerpc/fsl-booke: Allow larger CAM sizes than 256 MB
> powerpc/fsl-booke: Make CAM entries used for lowmem configurable
More information about the Linuxppc-dev
mailing list