[PATCH] Configure PSC4 and PSC5 as UART.
Grant Likely
grant.likely at secretlab.ca
Sat Feb 14 02:07:16 EST 2009
Hi Grzegorz,
Please rebase this patch on top of Ben Herrenschmidt's -next tree.
This version is making changes to an older version of the
digsy_mtc.dts file.
g.
On Fri, Feb 13, 2009 at 6:52 AM, Grzegorz Bernacki <gjb at semihalf.com> wrote:
> On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4.
>
> Signed-off-by: Grzegorz Bernacki <gjb at semihalf.com>
> ---
> arch/powerpc/boot/dts/digsy_mtc.dts | 16 ++++++++--------
> 1 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
> index 9c76c38..ce33c7c 100644
> --- a/arch/powerpc/boot/dts/digsy_mtc.dts
> +++ b/arch/powerpc/boot/dts/digsy_mtc.dts
> @@ -164,21 +164,21 @@
> reg = <0x1f00 0x100>;
> };
>
> - serial at 2400 { // PSC3
> + serial at 2600 { // PSC4
> device_type = "serial";
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <2>;
> - reg = <0x2400 0x100>;
> - interrupts = <2 3 0>;
> + cell-index = <3>;
> + reg = <0x2600 0x100>;
> + interrupts = <2 11 0>;
> interrupt-parent = <&mpc5200_pic>;
> };
>
> - serial at 2600 { // PSC4
> + serial at 2800 { // PSC5
> device_type = "serial";
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <3>;
> - reg = <0x2600 0x100>;
> - interrupts = <2 11 0>;
> + cell-index = <5>;
> + reg = <0x2800 0x100>;
> + interrupts = <2 12 0>;
> interrupt-parent = <&mpc5200_pic>;
> };
>
> --
> 1.6.0.6
>
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
More information about the Linuxppc-dev
mailing list