[PATCH] Configure PSC4 and PSC5 as UART.

[Grzegorz Bernacki]

On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4.

Signed-off-by: Grzegorz Bernacki <gjb at semihalf.com>
---
 arch/powerpc/boot/dts/digsy_mtc.dts |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 9c76c38..ce33c7c 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -164,21 +164,21 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial at 2400 {		// PSC3
+		serial at 2600 {		// PSC4
 			device_type = "serial";
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
+			cell-index = <3>;
+			reg = <0x2600 0x100>;
+			interrupts = <2 11 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
-		serial at 2600 {		// PSC4
+		serial at 2800 {		// PSC5
 			device_type = "serial";
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <3>;
-			reg = <0x2600 0x100>;
-			interrupts = <2 11 0>;
+			cell-index = <5>;
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
-- 
1.6.0.6