[PATCH] powerpc/83xx: Revive Marvell PHY option on MPC8313E-RDB rev. C boards

Anton Vorontsov avorontsov at ru.mvista.com
Fri Feb 13 12:18:01 EST 2009


On Thu, Feb 12, 2009 at 05:51:57PM -0600, Kumar Gala wrote:
> On Feb 11, 2009, at 11:40 PM, Li Yang-R58472 wrote:
>>>> Li, thanks for heads-up!
>>>>
>>>> One thing though: documentation says that Marvell PHY
>>> address is 0x3,
>>>> while old device tree and this patch:
>>>>
>>>>
>>> http://www.bitshrine.org/gpp/linux-fsl-2.6.23-MPC8313ERDB-add- 
>>> default-
>>>> dts.patch
>>>>
>>>> says "0x1"... I don't have any rev. C boards, so it would
>>> be great if
>>>> somebody could confirm that 0x1 is the actual address.
>>
>> The correct address is 0x3.  The previous patch in revB BSP used a  
>> guess
>> value before the revC documentation is available.  The latest BSP has
>> been updated to use the correct address.
>
> Anton, will you spin a new patch with this change?

Since the correct address is 0x3, that means that the old device
tree never worked on rev. C boards, thus there is no regression.
And furthermore, it appears that U-Boot doesn't support Marvell
PHY option either.

So, I don't think that adding the new device tree makes any sense
now.

I think the better option would be to implement Marvell PHY support
in U-Boot, and at the same time teach U-Boot to fixup 8313rdb's
device tree depending on the environment variable (something like
setenv marvell_phy_option yes/no), i.e. like I did for
MPC8315E-RDB's ULPI/TSEC1 options:

http://lists.denx.de/pipermail/u-boot/2008-July/036553.html

Makes sense? If not, I'll readily respin this patch with the PHY
address change.

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2



More information about the Linuxppc-dev mailing list