[PATCH] "multifunc-device": fix IRQ assignment by also scanning dummy nodes
Tom Arbuckle
tom.d.arbuckle at gmail.com
Thu Feb 12 07:41:48 EST 2009
Hello, Ben.
I've regenerated this patch against 2.6.28.4.
______
Kernel: 2.6.28.4; function: scan_OF_pci_childs; file: arch/powerpc/kernel/pci_32.c
Quoting from line 206 : 'some OFs create a parent node "multifunc-device" as a
fake root for all functions of a multi-function device. we go down them as well.'
Function scan_OF_for_pci_dev (line 225) also needs to be taught about
these dummy nodes to prevent misallocation/non-allocation of IRQs for
this class of devices.
Bug seen when using a bt878 multimedia controller card on a G3 Powermac.
This PCI card has separate audio and video nodes and was not being properly
assigned interrupts. (Either 'cannot grab irq 0' or type of assigned
interrupt wrt 'edge/level' was incorrect).
Signed off by: Tom Arbuckle <tom.d.arbuckle (at) gmail.com>
______
Regards,
Tom Arbuckle
Homepage: http://www.ece.ul.ie/homepage/Tom_Arbuckle/
LinkedIn: http://www.linkedin.com/in/tomarbuckle
--- linux-2.6.28.4/arch/powerpc/kernel/pci_32.c.orig 2009-02-06 21:47:45.000000000 +0000
+++ linux-2.6.28.4/arch/powerpc/kernel/pci_32.c 2009-02-07 16:37:04.000000000 +0000
@@ -226,15 +226,21 @@ static struct device_node *scan_OF_for_p
unsigned int devfn)
{
struct device_node *np;
+ struct device_node *np_sub = NULL;
const u32 *reg;
unsigned int psize;
for_each_child_of_node(parent, np) {
reg = of_get_property(np, "reg", &psize);
- if (reg == NULL || psize < 4)
- continue;
- if (((reg[0] >> 8) & 0xff) == devfn)
- return np;
+ if (reg && psize >= 4) {
+ if (((reg[0] >> 8) & 0xff) == devfn)
+ return np;
+ }
+ if (!strcmp(np->name, "multifunc-device")) {
+ np_sub = scan_OF_for_pci_dev(np, devfn);
+ if (np_sub)
+ return np_sub;
+ }
}
return NULL;
}
More information about the Linuxppc-dev
mailing list