Booting 2.6.29-rc3 on mpc8661d_hpcn failing

[Martyn Welch]

Kumar Gala wrote:
> 
> On Feb 2, 2009, at 3:36 AM, Martyn Welch wrote:
> 
>> Becky Bruce wrote:
>>> On Jan 30, 2009, at 8:42 AM, Kumar Gala wrote:
>>>>
>>>> On Jan 30, 2009, at 6:31 AM, Martyn Welch wrote:
>>>>
>>>>> Hi Guys,
>>>>>
>>>>> It seems that 2.6.29-rc3 is not booting on the MPC8641 HPCN. I have 
>>>>> just updated u-boot to the latest git to see if that improved 
>>>>> matters, however I get stuck at the following. Any ideas?
>>>>
>>>> did you update your .dtb as well?
>>
>> Yup, just double checked it. SOC mapped at ffe00000. If I use the 
>> wrong DTB I don't get any serial output...
>>
>>> We've changed the memory map for that board in the latest u-boot, 
>>> which is why you need a new .dtb.  If this still failing, let me 
>>> know, and I'll give it a try on my board and see what's up since this 
>>> is probably my fault :)
>>
>> It appears the same problem is affecting our sbc610 as well, the 
>> location of the SOC hasn't changed on that board.
>>
>> Martyn
> 
> Hm.. maybe try a git-bisect between 2.6.28 and 2.6.29-rc3?
> 

That's was today's "little" task. I was just in the process of writing an email :-)

It got me to the following commit:

commit 64b3d0e8122b422e879b23d42f9e0e8efbbf9744
Author: Benjamin Herrenschmidt <benh at kernel.crashing.org>

    powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDED

I tried reverting it, but as I had kinda thought, that really didn't help.

I'm just recompiling to check that I didn't screw-up during the bisection.

Martyn

-- 
Martyn Welch MEng MPhil MIET (Principal Software Engineer)   T:+44(0)1327322748
GE Fanuc Intelligent Platforms Ltd,        |Registered in England and Wales
Tove Valley Business Park, Towcester,      |(3828642) at 100 Barbirolli Square,
Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB  VAT:GB 729849476