Booting 2.6.29-rc3 on mpc8661d_hpcn failing

[Kumar Gala]

On Feb 2, 2009, at 3:36 AM, Martyn Welch wrote:

> Becky Bruce wrote:
>> On Jan 30, 2009, at 8:42 AM, Kumar Gala wrote:
>>>
>>> On Jan 30, 2009, at 6:31 AM, Martyn Welch wrote:
>>>
>>>> Hi Guys,
>>>>
>>>> It seems that 2.6.29-rc3 is not booting on the MPC8641 HPCN. I  
>>>> have just updated u-boot to the latest git to see if that  
>>>> improved matters, however I get stuck at the following. Any ideas?
>>>
>>> did you update your .dtb as well?
>
> Yup, just double checked it. SOC mapped at ffe00000. If I use the  
> wrong DTB I don't get any serial output...
>
>> We've changed the memory map for that board in the latest u-boot,  
>> which is why you need a new .dtb.  If this still failing, let me  
>> know, and I'll give it a try on my board and see what's up since  
>> this is probably my fault :)
>
> It appears the same problem is affecting our sbc610 as well, the  
> location of the SOC hasn't changed on that board.
>
> Martyn

Hm.. maybe try a git-bisect between 2.6.28 and 2.6.29-rc3?

- k