EP440XS board boot problem(Note:similart to Sequoia)
Allan Wang
aiyuanwang at yahoo.com
Sun Dec 13 18:18:11 EST 2009
Hello, Mr. Denk,
I forgot to give you the uboot printenv output.
=> printenv
bootcmd=run flash_self
bootdelay=5
baudrate=115200
loads_echo=1
preboot=run setup_phys;echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
netdev=eth0
hostname=ep440xs
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)
ramargs=setenv bootargs ramdisk=65536 root=/dev/ram rw
addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1
addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)
flash_nfs=run nfsargs addip addtty;bootm $(kernel_addr)
flash_self=run ramargs addip addtty;bootm $(kernel_addr) $(ramdisk_addr)
net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;bootm
kernel_addr=fe000000
ramdisk_addr=fe180000
load=tftp 0x200000 u-boot.bin
update=protect off 0xfff60000 0xffffffff;era 0xfffa0000 0xffffffff;cp.b 0x200000 fffa0000 60000
upd=run load;run update
usbact=hostdev
fixedip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1
dhcp=setenv bootargs $(bootargs) ip=dhcp
initphy=mii w ${phy} 14 e3;mii w ${phy} 18 4101;mii w ${phy} 9 e00;mii w ${phy} 4 1e1;mii w ${phy} 0 9140;mii w ${phy} 0 1140
setup_phys=setenv phy 0;run initphy;setenv phy 1;run initphy;setenv phy
progee=mw 0x100000 0x87788252;mw 0x100004 0x0957a030;mw 0x100008 0x40082350;mw 0x10000c 0x0d050000;eeprom write 0x54 0x100000 0x0 0x10
diags=cp.b 0xFFF40000 0x40000 0x20000;go 0x40004
dhcp_user-class-id=u-boot_test
rootpath=/opt/ppc/ppc_4xx
bootfile=cuImage.ep440xs
ipaddr=192.168.0.201
netmask=255.255.255.0
ethaddr=00:01:ec:01:12:83
eth1addr=00:01:ec:81:12:83
ethact=ppc_4xx_eth0
gateway=192.168.0.1
bootargs=$(bootargs) console=ttyS0,$(baudrate)
serverip=192.168.0.196
gatewayip=192.168.0.1
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 1.1.6 (Oct 25 2009 - 13:26:41)
Thanks,
Allan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20091212/b8a35be1/attachment.htm>
More information about the Linuxppc-dev
mailing list