[microblaze-uclinux] [PATCH 11/11] microblaze: Kconfig: Enable drivers for Microblaze

[Stephen Neuendorffer]

On Fri, Apr 17, 2009 at 10:49 PM, Grant Likely <grant.likely at secretlab.ca>wrote:

> On Fri, Apr 17, 2009 at 11:06 AM, Stephen Neuendorffer
> <stephen.neuendorffer at xilinx.com> wrote:
> >
> > Can we have XILINX_DRIVERS, please?  That way this can also be enabled
> > on any architecture that has FPGA peripherals.
>
> I've thought about this more, and I'd really rather not.  The list of
> affected drivers is short and is not a large maintenance burden.  I
> don't think a list of 2 or 3 architecture selects for each driver is
> unreasonable.  A "XILINX_DRIVERS" config item doesn't really help much
> anyway.  At any given time one of these drivers may be needed on
> another platform.  ie. the SystemACE device is present on at least one
> non-virtex, non-spartan platform.


Which is exactly why having it architecture dependent isn't right...  All of
these drivers
could be needed and used on any OF-based platform.  If you have a platform
(for instance, a processor connected to an FPGA which has these peripherals
in the FPGA) then you should be able to enable these drivers.  Just my 2
cents...

Steve


>
> g.
>
> >
> > Steve
> >
> >> -----Original Message-----
> >> From: owner-microblaze-uclinux at itee.uq.edu.au
> > [mailto:owner-microblaze-uclinux at itee.uq.edu.au] On
> >> Behalf Of monstr at monstr.eu
> >> Sent: Thursday, April 16, 2009 2:57 AM
> >> To: linux-kernel at vger.kernel.org
> >> Cc: microblaze-uclinux at itee.uq.edu.au; Michal Simek
> >> Subject: [microblaze-uclinux] [PATCH 11/11] microblaze: Kconfig:
> > Enable drivers for Microblaze
> >>
> >> From: Michal Simek <monstr at monstr.eu>
> >>
> >> Signed-off-by: Michal Simek <monstr at monstr.eu>
> >> ---
> >>  drivers/block/Kconfig |    2 +-
> >>  drivers/char/Kconfig  |    2 +-
> >>  drivers/gpio/Kconfig  |    2 +-
> >>  drivers/usb/Kconfig   |    1 +
> >>  4 files changed, 4 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> >> index ddea8e4..9f1665f 100644
> >> --- a/drivers/block/Kconfig
> >> +++ b/drivers/block/Kconfig
> >> @@ -438,7 +438,7 @@ source "drivers/s390/block/Kconfig"
> >>
> >>  config XILINX_SYSACE
> >>       tristate "Xilinx SystemACE support"
> >> -     depends on 4xx
> >> +     depends on 4xx || MICROBLAZE
> >>       help
> >>         Include support for the Xilinx SystemACE CompactFlash
> > interface
> >>
> >> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
> >> index 735bbe2..bb1a071 100644
> >> --- a/drivers/char/Kconfig
> >> +++ b/drivers/char/Kconfig
> >> @@ -893,7 +893,7 @@ config DTLK
> >>
> >>  config XILINX_HWICAP
> >>       tristate "Xilinx HWICAP Support"
> >> -     depends on XILINX_VIRTEX
> >> +     depends on XILINX_VIRTEX || MICROBLAZE
> >>       help
> >>         This option enables support for Xilinx Internal Configuration
> >>         Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
> >> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> >> index edb0253..11f3739 100644
> >> --- a/drivers/gpio/Kconfig
> >> +++ b/drivers/gpio/Kconfig
> >> @@ -69,7 +69,7 @@ comment "Memory mapped GPIO expanders:"
> >>
> >>  config GPIO_XILINX
> >>       bool "Xilinx GPIO support"
> >> -     depends on PPC_OF
> >> +     depends on PPC_OF || MICROBLAZE
> >>       help
> >>         Say yes here to support the Xilinx FPGA GPIO device
> >>
> >> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> >> index c6c816b..5eee3f8 100644
> >> --- a/drivers/usb/Kconfig
> >> +++ b/drivers/usb/Kconfig
> >> @@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
> >>       default y if PCMCIA && !M32R                    # sl811_cs
> >>       default y if ARM                                # SL-811
> >>       default y if SUPERH                             # r8a66597-hcd
> >> +     default y if MICROBLAZE
> >>       default PCI
> >>
> >>  # many non-PCI SOC chips embed OHCI
> >> --
> >> 1.5.5.1
> >>
> >> ___________________________
> >> microblaze-uclinux mailing list
> >> microblaze-uclinux at itee.uq.edu.au
> >> Project Home Page :
> > http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux<http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> >> Mailing List Archive :
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/<http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> >>
> >
> >
> > This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be
> proprietary, privileged or copyrighted under applicable law. If you are not
> the intended recipient, do not read, copy, or forward this email message or
> any attachments. Delete this email message and any attachments immediately.
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
>
>
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20090418/35435c42/attachment.htm>