[microblaze-uclinux] [PATCH 11/11] microblaze: Kconfig: Enable drivers for Microblaze

Grant Likely grant.likely at secretlab.ca
Sat Apr 18 15:49:47 EST 2009


On Fri, Apr 17, 2009 at 11:06 AM, Stephen Neuendorffer
<stephen.neuendorffer at xilinx.com> wrote:
>
> Can we have XILINX_DRIVERS, please?  That way this can also be enabled
> on any architecture that has FPGA peripherals.

I've thought about this more, and I'd really rather not.  The list of
affected drivers is short and is not a large maintenance burden.  I
don't think a list of 2 or 3 architecture selects for each driver is
unreasonable.  A "XILINX_DRIVERS" config item doesn't really help much
anyway.  At any given time one of these drivers may be needed on
another platform.  ie. the SystemACE device is present on at least one
non-virtex, non-spartan platform.

g.

>
> Steve
>
>> -----Original Message-----
>> From: owner-microblaze-uclinux at itee.uq.edu.au
> [mailto:owner-microblaze-uclinux at itee.uq.edu.au] On
>> Behalf Of monstr at monstr.eu
>> Sent: Thursday, April 16, 2009 2:57 AM
>> To: linux-kernel at vger.kernel.org
>> Cc: microblaze-uclinux at itee.uq.edu.au; Michal Simek
>> Subject: [microblaze-uclinux] [PATCH 11/11] microblaze: Kconfig:
> Enable drivers for Microblaze
>>
>> From: Michal Simek <monstr at monstr.eu>
>>
>> Signed-off-by: Michal Simek <monstr at monstr.eu>
>> ---
>>  drivers/block/Kconfig |    2 +-
>>  drivers/char/Kconfig  |    2 +-
>>  drivers/gpio/Kconfig  |    2 +-
>>  drivers/usb/Kconfig   |    1 +
>>  4 files changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>> index ddea8e4..9f1665f 100644
>> --- a/drivers/block/Kconfig
>> +++ b/drivers/block/Kconfig
>> @@ -438,7 +438,7 @@ source "drivers/s390/block/Kconfig"
>>
>>  config XILINX_SYSACE
>>       tristate "Xilinx SystemACE support"
>> -     depends on 4xx
>> +     depends on 4xx || MICROBLAZE
>>       help
>>         Include support for the Xilinx SystemACE CompactFlash
> interface
>>
>> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
>> index 735bbe2..bb1a071 100644
>> --- a/drivers/char/Kconfig
>> +++ b/drivers/char/Kconfig
>> @@ -893,7 +893,7 @@ config DTLK
>>
>>  config XILINX_HWICAP
>>       tristate "Xilinx HWICAP Support"
>> -     depends on XILINX_VIRTEX
>> +     depends on XILINX_VIRTEX || MICROBLAZE
>>       help
>>         This option enables support for Xilinx Internal Configuration
>>         Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
>> index edb0253..11f3739 100644
>> --- a/drivers/gpio/Kconfig
>> +++ b/drivers/gpio/Kconfig
>> @@ -69,7 +69,7 @@ comment "Memory mapped GPIO expanders:"
>>
>>  config GPIO_XILINX
>>       bool "Xilinx GPIO support"
>> -     depends on PPC_OF
>> +     depends on PPC_OF || MICROBLAZE
>>       help
>>         Say yes here to support the Xilinx FPGA GPIO device
>>
>> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
>> index c6c816b..5eee3f8 100644
>> --- a/drivers/usb/Kconfig
>> +++ b/drivers/usb/Kconfig
>> @@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
>>       default y if PCMCIA && !M32R                    # sl811_cs
>>       default y if ARM                                # SL-811
>>       default y if SUPERH                             # r8a66597-hcd
>> +     default y if MICROBLAZE
>>       default PCI
>>
>>  # many non-PCI SOC chips embed OHCI
>> --
>> 1.5.5.1
>>
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux at itee.uq.edu.au
>> Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>
>
>
> This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.



More information about the Linuxppc-dev mailing list