Kernel Oops when run ifconfig on MPC8360MDS board

[mike zheng]

Oh, I forgot to metion just now. The linux is based on a custom built
kernel 2.4.22, not from Freescale.

On 10/20/08, mike zheng <mail4mz at gmail.com> wrote:
> On 10/20/08, Kim Phillips <kim.phillips at freescale.com> wrote:
> > On Mon, 20 Oct 2008 15:00:33 -0700
> > "mike zheng" <mail4mz at gmail.com> wrote:
> >
> > > I have following kernel Oops when I run ifconfig to setup the UEC0 of
> > > MPC8360MDS board. There is no hardware problem, the UEC0 runs well
> > > under Uboot.
> >
> > does this occur on vanilla u-boot and kernel versions?  if so, which
> > ones, and on what board revision?
> >
> The kernel Oops happened under Linux when I try to use "ifconfig" to
> setup the eth0. Under Uboot, the UEC0 works fine. I am able to do
> ping, tftp via the ethernet port.
>
>
> > > Call backtrace:
> > > C0126890 C00D59D0 C00D761C C012F400 C0130DD4 C01746B4 C017712C
> > > C0127770 C004D8B0 C0005ABC 00000000 10001214 100023C4 0FEC4E00
> > > 00000000
> >
> > might want to turn on verbose debugging while you're at it.
>
> Which flag shall I turned on? I am not formaliar to the network driver. Thanks!
> >
> > Kim
> >
>