Kernel Oops when run ifconfig on MPC8360MDS board
mike zheng
mail4mz at gmail.com
Tue Oct 21 15:23:28 EST 2008
On 10/20/08, Kim Phillips <kim.phillips at freescale.com> wrote:
> On Mon, 20 Oct 2008 15:00:33 -0700
> "mike zheng" <mail4mz at gmail.com> wrote:
>
> > I have following kernel Oops when I run ifconfig to setup the UEC0 of
> > MPC8360MDS board. There is no hardware problem, the UEC0 runs well
> > under Uboot.
>
> does this occur on vanilla u-boot and kernel versions? if so, which
> ones, and on what board revision?
>
The kernel Oops happened under Linux when I try to use "ifconfig" to
setup the eth0. Under Uboot, the UEC0 works fine. I am able to do
ping, tftp via the ethernet port.
> > Call backtrace:
> > C0126890 C00D59D0 C00D761C C012F400 C0130DD4 C01746B4 C017712C
> > C0127770 C004D8B0 C0005ABC 00000000 10001214 100023C4 0FEC4E00
> > 00000000
>
> might want to turn on verbose debugging while you're at it.
Which flag shall I turned on? I am not formaliar to the network driver. Thanks!
>
> Kim
>
More information about the Linuxppc-dev
mailing list