"eth1: Could not attach to PHY" on MPC8349e-MITX

[Timur Tabi]

Andre Schwarz wrote:
> Timur,
> 
> is it possible that the PHY adress doesn't match the one specified in
> the dts ?

What part of the DTS contains the PHY address?  I have this:

	mdio at 24520 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,gianfar-mdio";
		reg = <0x24520 0x20>;

		/* Vitesse 8201 */
		phy1c: ethernet-phy at 1c {
			interrupt-parent = <&ipic>;
			interrupts = <18 0x8>;
			reg = <0x1c>;
			device_type = "ethernet-phy";
		};
	};

	enet1: ethernet at 25000 {
		cell-index = <1>;
		device_type = "network";
		model = "TSEC";
		compatible = "gianfar";
		reg = <0x25000 0x1000>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <35 0x8 36 0x8 37 0x8>;
		phy-connection-type = "mii";
		interrupt-parent = <&ipic>;
		/* Vitesse 7385 isn't on the MDIO bus */
		fixed-link = <1 1 1000 0 0>;
		linux,network-index = <1>;
	};

-- 
Timur Tabi
Linux kernel developer at Freescale