[PATCH v3 9/9] add MPC837x MDS board default device tree

[Kumar Gala]

>>>>
>>>> diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts
>>>> b/arch/powerpc/boot/dts/mpc8377_mds.dts
>>> [snip]
>>>> +	soc837x at e0000000 {
>>>> +		#address-cells = <1>;
>>>> +		#size-cells = <1>;
>>>> +		device_type = "soc";
>>>> +		ranges = <0 e0000000 00100000>;
>>>> +		reg = <e0000000 00000200>;
>>>> +		bus-frequency = <0>;
>>>> +
>>>> +		wdt at 200 {
>>>> +			device_type = "watchdog";
>>>
>>> Drop this device_type.
>>>
>>>> +			compatible = "mpc83xx_wdt";
>>>> +			reg = <200 100>;
>>>> +		};
>>>> +
>>>> +		i2c at 3000 {
>>>> +			device_type = "i2c";
>>>
>>> And this one.
>>
>> I've asked Leo to leave this one as all other fsl boards do
>> this and the code depends on it.  There was some discussion
>> about this but I wasn't sure if it was closed or not.
>
> I'm afraid not only i2c but also watchdog and spi need device_type  
> now.
> Shall we proceed removing the type check?

We are NOT changing that code until 2.6.25.

- k