The SerDes(serializer/deserializer) PHY block is a new SoC block used
in Freescale chips to support multiple serial interfaces, such as PCI
Express, SGMII, SATA.
Signed-off-by: Li Yang <leoli at freescale.com>
---
arch/powerpc/platforms/Kconfig | 3 +
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/fsl_serdes.c | 195 ++++++++++++++++++++++++++++++++++++++
3 files changed, 199 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/sysdev/fsl_serdes.c
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 229d355..0719e89 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -315,6 +315,9 @@ config FSL_ULI1575
config CPM
bool
+config FSL_SERDES
+ bool
+
source "arch/powerpc/sysdev/bestcomm/Kconfig"
endmenu
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 99a77d7..2343ea4 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
mv64x60_udbg.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
obj-$(CONFIG_AXON_RAM) += axonram.o
+obj-$(CONFIG_FSL_SERDES) += fsl_serdes.o
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
diff --git a/arch/powerpc/sysdev/fsl_serdes.c b/arch/powerpc/sysdev/fsl_serdes.c
new file mode 100644
index 0000000..670015d
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_serdes.c
@@ -0,0 +1,195 @@
+/*
+ * arch/powerpc/sysdev/fsl_serdes.c
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli at freescale.com>
+ *
+ * Freescale SerDes initialization routines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+
+#define FSL_SRDSCR0_OFFS 0x0
+#define FSL_SRDSCR0_DPP_1V2 0x00008800
+#define FSL_SRDSCR1_OFFS 0x4
+#define FSL_SRDSCR1_PLLBW 0x00000040
+#define FSL_SRDSCR2_OFFS 0x8
+#define FSL_SRDSCR2_VDD_1V2 0x00800000
+#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
+#define FSL_SRDSCR2_SEIC_SATA 0x00001414
+#define FSL_SRDSCR2_SEIC_PEX 0x00001010
+#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
+#define FSL_SRDSCR3_OFFS 0xc
+#define FSL_SRDSCR3_KFR_SATA 0x10100000
+#define FSL_SRDSCR3_KPH_SATA 0x04040000
+#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
+#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
+#define FSL_SRDSCR4_OFFS 0x10
+#define FSL_SRDSCR4_PROT_SATA 0x00000808
+#define FSL_SRDSCR4_PROT_PEX 0x00000101
+#define FSL_SRDSCR4_PROT_SGMII 0x00000505
+#define FSL_SRDSCR4_PLANE_X2 0x01000000
+#define FSL_SRDSCR4_RFCKS_100 0x00000000
+#define FSL_SRDSCR4_RFCKS_125 0x10000000
+#define FSL_SRDSCR4_RFCKS_150 0x30000000
+#define FSL_SRDSRSTCTL_OFFS 0x20
+#define FSL_SRDSRSTCTL_RST 0x80000000
+#define FSL_SRDSRSTCTL_SATA_RESET 0xf
+
+static int fsl_serdes_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->node;
+ void __iomem *regs;
+ const char *prot;
+ const unsigned int *freq;
+ u32 rfcks;
+
+ regs = of_iomap(np, 0);
+ if (!regs)
+ return -ENOMEM;
+
+ prot = of_get_property(np, "protocol", NULL);
+ if (!prot)
+ goto out;
+ freq = of_get_property(np, "clock", NULL);
+ if (!freq)
+ goto out;
+ switch (*freq) {
+ case 100:
+ rfcks = FSL_SRDSCR4_RFCKS_100;
+ break;
+ case 125:
+ rfcks = FSL_SRDSCR4_RFCKS_125;
+ break;
+ case 150:
+ rfcks = FSL_SRDSCR4_RFCKS_150;
+ break;
+ default:
+ printk(KERN_ERR "SerDes: Wrong frequency\n");
+ goto out;
+ }
+
+ /* Use default prescale and counter */
+
+ /* 1.0V corevdd */
+ if (of_get_property(np, "vdd-1v", NULL)) {
+ /* DPPE/DPPA = 0 */
+ clrbits32(regs + FSL_SRDSCR0_OFFS, FSL_SRDSCR0_DPP_1V2);
+
+ /* VDD = 0 */
+ clrbits32(regs + FSL_SRDSCR2_OFFS, FSL_SRDSCR2_VDD_1V2);
+ }
+
+ /* protocol specific configuration */
+ if (!strcmp(prot, "sata")) {
+ /* Set and clear reset bits */
+ setbits32(regs + FSL_SRDSRSTCTL_OFFS,
+ FSL_SRDSRSTCTL_SATA_RESET);
+ mdelay(1);
+ clrbits32(regs + FSL_SRDSRSTCTL_OFFS,
+ FSL_SRDSRSTCTL_SATA_RESET);
+
+ /* Configure SRDSCR1 */
+ clrbits32(regs + FSL_SRDSCR1_OFFS, FSL_SRDSCR1_PLLBW);
+
+ /* Configure SRDSCR2 */
+ clrsetbits_be32(regs + FSL_SRDSCR2_OFFS,
+ FSL_SRDSCR2_SEIC_MASK, FSL_SRDSCR2_SEIC_SATA);
+
+ /* Configure SRDSCR3 */
+ out_be32(regs + FSL_SRDSCR3_OFFS, FSL_SRDSCR3_KFR_SATA |
+ FSL_SRDSCR3_KPH_SATA |
+ FSL_SRDSCR3_SDFM_SATA_PEX |
+ FSL_SRDSCR3_SDTXL_SATA);
+
+ /* Configure SRDSCR4 */
+ out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
+ FSL_SRDSCR4_PROT_SATA);
+
+ } else if (!strcmp(prot, "pcie")) {
+ /* Configure SRDSCR1 */
+ setbits32(regs + FSL_SRDSCR1_OFFS, FSL_SRDSCR1_PLLBW);
+
+ /* Configure SRDSCR2 */
+ clrsetbits_be32(regs + FSL_SRDSCR2_OFFS, FSL_SRDSCR2_SEIC_MASK,
+ FSL_SRDSCR2_SEIC_PEX);
+
+ /* Configure SRDSCR3 */
+ out_be32(regs + FSL_SRDSCR3_OFFS, FSL_SRDSCR3_SDFM_SATA_PEX);
+
+ /* Configure SRDSCR4 */
+ if (of_get_property(np, "pcie-x2", NULL))
+ out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
+ FSL_SRDSCR4_PROT_PEX | FSL_SRDSCR4_PLANE_X2);
+ else
+ out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
+ FSL_SRDSCR4_PROT_PEX);
+
+ } else if (!strcmp(prot, "sgmii")) {
+ /* Configure SRDSCR1 */
+ clrbits32(regs + FSL_SRDSCR1_OFFS, FSL_SRDSCR1_PLLBW);
+
+ /* Configure SRDSCR2 */
+ clrsetbits_be32(regs + FSL_SRDSCR2_OFFS, FSL_SRDSCR2_SEIC_MASK,
+ FSL_SRDSCR2_SEIC_SGMII);
+
+ /* Configure SRDSCR3 */
+ out_be32(regs + FSL_SRDSCR3_OFFS, 0);
+
+ /* Configure SRDSCR4 */
+ out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
+ FSL_SRDSCR4_PROT_SGMII);
+
+ } else {
+ printk(KERN_ERR "SerDes: Wrong protocol\n");
+ goto out;
+ }
+
+ /* Do a software reset */
+ setbits32(regs + FSL_SRDSRSTCTL_OFFS, FSL_SRDSRSTCTL_RST);
+ iounmap(regs);
+
+ dev_printk(KERN_INFO, &ofdev->dev, "Initialized as %s\n", prot);
+
+ return 0;
+out:
+ iounmap(regs);
+ return -EINVAL;
+}
+
+static struct of_device_id fsl_serdes_match[] = {
+ {
+ .compatible = "fsl,serdes",
+ },
+ {},
+};
+
+static struct of_platform_driver fsl_serdes_driver = {
+ .name = "fsl-serdes",
+ .match_table = fsl_serdes_match,
+ .probe = fsl_serdes_probe,
+};
+
+static int __init fsl_serdes_init(void)
+{
+ of_register_platform_driver(&fsl_serdes_driver);
+ return 0;
+}
+device_initcall(fsl_serdes_init);
--
1.5.3.2.104.g41ef