[PATCH v3 9/9] add MPC837x MDS board default device tree

[Kumar Gala]

On Oct 14, 2007, at 7:37 PM, David Gibson wrote:

> On Fri, Oct 12, 2007 at 09:28:48PM +0800, Li Yang wrote:
>> Signed-off-by: Li Yang <leoli at freescale.com>
>> ---
>>  arch/powerpc/boot/dts/mpc8377_mds.dts |  288 +++++++++++++++++++++ 
>> +++++++++
>>  arch/powerpc/boot/dts/mpc8378_mds.dts |  268 +++++++++++++++++++++ 
>> +++++++
>>  arch/powerpc/boot/dts/mpc8379_mds.dts |  308 +++++++++++++++++++++ 
>> ++++++++++++
>>  3 files changed, 864 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
>>  create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
>>  create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
>>
>> diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts
>> b/arch/powerpc/boot/dts/mpc8377_mds.dts
> [snip]
>> +	soc837x at e0000000 {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		device_type = "soc";
>> +		ranges = <0 e0000000 00100000>;
>> +		reg = <e0000000 00000200>;
>> +		bus-frequency = <0>;
>> +
>> +		wdt at 200 {
>> +			device_type = "watchdog";
>
> Drop this device_type.
>
>> +			compatible = "mpc83xx_wdt";
>> +			reg = <200 100>;
>> +		};
>> +
>> +		i2c at 3000 {
>> +			device_type = "i2c";
>
> And this one.

I've asked Leo to leave this one as all other fsl boards do this and  
the code depends on it.  There was some discussion about this but I  
wasn't sure if it was closed or not.

>> +			compatible = "fsl-i2c";
>> +			reg = <3000 100>;
>> +			interrupts = <e 8>;
>> +			interrupt-parent = < &ipic >;
>> +			dfsrr;
>> +		};
>> +

- k