[PATCH] [PPC 44x] L2-cache synchronization for ppc44x

[Yuri Tikhonov]

 Hi Ben,


On 08.11.2007, 2:19:33 you wrote:
> On Thu, 2007-11-08 at 02:12 +0300, Yuri Tikhonov wrote:
>> This is the updated patch for support synchronization of L2-Cache with
>> the external memory on the ppc44x-based platforms.
>> 
>>  Differencies against the previous patch-set:
>> - remove L2_CACHE config option;
>> - introduce the ppc machdep to invalidate L2 cache lines;
>> - some code clean-up.

> Can you tell me more about how this cache operates ? I don't quite
> understand why you would invalidate it on bidirectional DMAs rather than
> flush it to memory (unless you get your terminology wrong) and why you
> wouldn't flush it on transfers to the device.. Unless it is a
> write-through cache ?

 Yes, the ppc44x Level2 cache has the write-through design, so no need to do any kind of l2_flush.

 As far as the DMA_BIDIRECTIONAL case is concerned flush_dcache_range() flushes the data over the following path: L1->L2->RAM, but invalidates L1 only, and  L2 remains invalid. Since in the BIDIRECTIONAL case DMA may update the data in RAM - we have to invalidate L2-cache manually, so that CPU may read new data transmitted by DMA right from RAM rather than old ones stuck in L2 due to flush_dcache().


Regards,
 Yuri 

-- 
Yuri Tikhonov, Senior Software Engineer
Emcraft Systems, www.emcraft.com