Xilinx git tree at source.mvista.com

[Andrei Konovalov]

Hi David,

David H. Lynch Jr. wrote:
> Andrei Konovalov wrote:
>> Hello,
>>
>> My Xilinx Virtex Development tree is now alive again.
>>
>> Please use the dev branch (master is just the ko copy):
>> http://source.mvista.com/git/gitweb.cgi?p=linux-xilinx-26.git;a=shortlog;h=dev
>> Currently it has a patch to enable the framebuffer
>> on ML403 and ML300 plus TEMAC driver that uses
>> the PHY lib (FIFO mode support only).
>> The TEMAC driver is work in progress.
>> In the queue are SGDMA TEMAC support, and SPI driver
>> (master only).
>>
>> My concern is that the TEMAC driver uses the "level 1 drivers" from EDK 9.1.
>> The comments / opinions on how to get this driver (not the current incomplete
>> version of course) accepted into the ko tree are very welcomed.
>>   
> I have an almost working FIFO TEMAC driver. It is similarly based.
> it started out based on the Trek webserver sample

Is this a reference design by Xilinx? Linux based or standalone?

> I spent probably 3-4 days de-EDKing it into something that fit into a
> single source and was closer to ko norms.
> It is based on approximately the EDK 8.1 stuff. You are welcome to it,
> if it could be helpful in anyway.
> I am all for getting an acceptable driver into the ko tree.

You could post your driver to the list when you think it is in good enough shape.
If your driver is based on the linux TEMAC driver from EDK, it shouldn't
be very different from my version (my added value is mostly replacing the
custom PHY code with the PHY lib stuff). Then we could merge our drivers (or
whatever would make sense).

I would be interested to have a look at your current code just to see
how much has it cost to "de-EDK" the FIFO part. You could email me
your (even not quite working) driver privately if you want.


Thanks,
Andrei