[PATCH 11/19] powerpc: setup usb host controller in SCC for Celleb

Benjamin Herrenschmidt benh at kernel.crashing.org
Thu Jan 18 11:29:26 EST 2007


On Fri, 2007-01-12 at 10:11 +0900, Ishizaki Kou wrote:
> USB host controller in SCC requires enable sequence. It should be done
> before USB host drivers start.
> 
> Signed-off-by: Kou Ishizaki <kou.ishizaki at toshiba.co.jp>

Just a small nit here: Either you want that code to kick on any platform
that has a Toshiba SCC with that controller, in which case, put it in a
more generic place, like arch/powerpc/kernel/pci_64.c or
drivers/usb/host/pci_quirk.c, or you want that to run only on celleb (at
least for now) in which case, add a

	if (!machine_is(celleb))
		return;

At the beginning, since if one builds a kernel with more than one
platform in, your quirk will be run regardless of the platform selected
at boot.

Ben.

> ---
> 
> Index: linux-powerpc-git/arch/powerpc/platforms/celleb/scc_uhc.c
> diff -u /dev/null linux-powerpc-git/arch/powerpc/platforms/celleb/scc_uhc.c:1.4
> --- /dev/null	Thu Jan 11 22:03:27 2007
> +++ linux-powerpc-git/arch/powerpc/platforms/celleb/scc_uhc.c	Thu Jan 11 22:02:21 2007
> @@ -0,0 +1,90 @@
> +/*
> + * SCC (Super Companion Chip) UHC setup
> + *
> + * (C) Copyright 2006 TOSHIBA CORPORATION
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +
> +#include <asm/delay.h>
> +#include <asm/io.h>
> +
> +#include "scc.h"
> +
> +#define UHC_RESET_WAIT_MAX 10000
> +
> +static inline int uhc_clkctrl_ready(u32 val)
> +{
> +	const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN;
> +	return((val & mask) == mask);
> +}
> +
> +/*
> + * UHC(usb host controler) enable function.
> + * affect to both of OHCI and EHCI core module.
> + */
> +static void enable_scc_uhc(struct pci_dev *dev)
> +{
> +	void __iomem *uhc_base;
> +	u32 __iomem *uhc_clkctrl;
> +	u32 __iomem *uhc_ecmode;
> +	u32 val = 0;
> +	int i;
> +
> +	uhc_base = ioremap(pci_resource_start(dev, 0),
> +			   pci_resource_len(dev, 0));
> +	if (!uhc_base) {
> +		printk(KERN_ERR "failed to map UHC register base.\n");
> +		return;
> +	}
> +	uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL; 
> +	uhc_ecmode  = uhc_base + SCC_UHC_ECMODE; 
> +
> +	/* setup for normal mode */
> +	val |= SCC_UHC_F48MCKLEN;
> +	out_be32(uhc_clkctrl, val);
> +	val |= SCC_UHC_PHY_SUSPEND_SEL;
> +	out_be32(uhc_clkctrl, val);
> +	udelay(10);
> +	val |= SCC_UHC_PHYEN;
> +	out_be32(uhc_clkctrl, val);
> +	udelay(50);
> +
> +	/* disable reset */
> +	val |= SCC_UHC_HCLKEN;
> +	out_be32(uhc_clkctrl, val);
> +	val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN);
> +	out_be32(uhc_clkctrl, val);
> +	i = 0;
> +	while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) {
> +		udelay(10);
> +		if (i++ > UHC_RESET_WAIT_MAX) {
> +			printk(KERN_ERR "Failed to disable UHC reset %x\n",
> +			       in_be32(uhc_clkctrl));
> +			break;
> +		}
> +	}
> +
> +	/* Endian Conversion Mode for Master ALL area */
> +	out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE);
> +
> +	iounmap(uhc_base);
> +}
> +
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
> +		 PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc);
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev




More information about the Linuxppc-dev mailing list