Update on: MPC85xx git/MPC8548cds - PCI/PCIE problemS with Marvel SATA driver...

[Morrison, Tom]

Yup, missed that! Thank you 

-----Original Message-----
From: Timur Tabi [mailto:timur at freescale.com] 
Sent: Sunday, February 25, 2007 7:18 PM
To: Morrison, Tom
Cc: linuxppc-dev at ozlabs.org
Subject: Re: Update on: MPC85xx git/MPC8548cds - PCI/PCIE problemS with
Marvel SATA driver...

Benjamin Herrenschmidt wrote:

> The above looks like it's working and you don't have a proper
partition
> table on the disk or you haven't compiled in support for the right
type
> of partition map (this is different from the filesystem type)....
> 
> Make sure you enable MS-DOS partition type support in addition to file
> system type.

Yeah, I made the same mistake once too.

The trick is not to confuse a file system with a partition type. 
They're completely separate options.  You can select any combination of 
file systems and partition types, even combinations that can never exist

in the real world.  So if you turn on MS-DOS file system support, you 
also need to turn on MS-DOS partition support.