MPC85xx git branch - problem with Marvel SATA driver...

[Morrison, Tom]

Will try this out and let you know!

t

-----Original Message-----
From: Andy Fleming [mailto:afleming at freescale.com] 
Sent: Tuesday, February 20, 2007 2:41 PM
To: Morrison, Tom
Cc: linuxppc-dev at ozlabs.org; Geary Sean-R60898; Zhang Wei-r63237
Subject: Re: MPC85xx git branch - problem with Marvel SATA driver...


On Feb 16, 2007, at 16:02, Morrison, Tom wrote:

> Andy,
>
> CDS is in slot #2, marvel sata card is in Slot #5
>
> I am using the new u-boot git branch from freescale for
> the MPC85xx_cds. I was told to use this with the new
> software - which is also using the device tree as well...
>
> Can't tell what version of Arcadia board - where is this located?


Sorry for the delay.  I wasn't quite sure how to find that  
information.  However, back channels have indicated you may be using  
a 3.0 Arcadia.  In that case, you need to use the dts in arch/powerpc/ 
boot/dts/mpc8548cds_legacy.dts.  It's not a very useful name (sorry),  
but that's what it's called internally right now.  The interrupt maps  
for 3.0 and 3.1 PCI are different, and that would explain your  
problem, I hope.


Andy