[CFT] Don't use ASYNC_* nor SERIAL_IO_* with serial_core
Russell King
rmk+lkml at arm.linux.org.uk
Sun Jan 22 08:14:07 EST 2006
The serial_core layer has its own definitions for these, and I'd
appreciate it if folk would use them instead of the old ASYNC_* and
SERIAL_IO_* definitions.
They're compatible _at the moment_ but I make no guarantees that they
will stay that way. Hence, it's in your interest to ensure that you're
using the correct definitions.
MIPS, PPC seem to be the architectures which are stuck in the past on
this issue, as is the M32R SIO driver.
The ioc4_serial driver is worse. It assumes that it can set/clear
ASYNC_CTS_FLOW in the uart_info flags field, which is private to
serial_core. It also seems to set TTY_IO_ERROR followed by immediately
clearing it (pointless), and then it writes to tty->alt_speed... which
isn't used by the serial layer so is also pointless.
So, here's a patch to fix some of this crap up. Please test and
enjoy - I certainly didn't.
arch/mips/cobalt/setup.c | 2 +-
arch/mips/lasat/setup.c | 4 ++--
arch/mips/mips-boards/atlas/atlas_setup.c | 4 ++--
arch/mips/mips-boards/sead/sead_setup.c | 4 ++--
arch/mips/mips-boards/sim/sim_setup.c | 4 ++--
arch/mips/momentum/jaguar_atx/ja-console.c | 2 +-
arch/mips/pmc-sierra/yosemite/setup.c | 2 +-
arch/mips/sgi-ip32/ip32-setup.c | 13 ++++---------
arch/ppc/platforms/4xx/bamboo.c | 4 ++--
arch/ppc/platforms/4xx/bubinga.c | 4 ++--
arch/ppc/platforms/4xx/ebony.c | 4 ++--
arch/ppc/platforms/4xx/luan.c | 4 ++--
arch/ppc/platforms/4xx/ocotea.c | 4 ++--
arch/ppc/platforms/4xx/xilinx_ml300.c | 4 ++--
arch/ppc/platforms/4xx/yucca.c | 4 ++--
arch/ppc/platforms/spruce.c | 4 ++--
drivers/serial/ioc4_serial.c | 14 --------------
drivers/serial/m32r_sio.c | 2 +-
18 files changed, 32 insertions(+), 51 deletions(-)
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -139,7 +139,7 @@ void __init plat_setup(void)
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
uart.irq = COBALT_SERIAL_IRQ;
- uart.flags = STD_COM_FLAGS;
+ uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
uart.iobase = 0xc800000;
uart.iotype = UPIO_PORT;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -134,8 +134,8 @@ void __init serial_init(void)
memset(&s, 0, sizeof(s));
- s.flags = STD_COM_FLAGS;
- s.iotype = SERIAL_IO_MEM;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
if (mips_machtype == MACH_LASAT_100) {
s.uartclk = LASAT_BASE_BAUD_100 * 16;
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -82,8 +82,8 @@ static void __init serial_init(void)
#endif
s.irq = ATLASINT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = SERIAL_IO_PORT;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -71,8 +71,8 @@ static void __init serial_init(void)
#endif
s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
s.uartclk = SEAD_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = 0;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
--- a/arch/mips/mips-boards/sim/sim_setup.c
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -88,8 +88,8 @@ static void __init serial_init(void)
but poll for now */
s.irq = 0;
s.uartclk = BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
- s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_PORT;
s.regshift = 0;
s.timeout = 4;
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ b/arch/mips/momentum/jaguar_atx/ja-console.c
@@ -93,7 +93,7 @@ static void inline ja_console_probe(void
up.uartclk = JAGUAR_ATX_UART_CLK;
up.regshift = 2;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -185,7 +185,7 @@ static void __init py_uart_setup(void)
up.uartclk = TITAN_UART_CLK;
up.regshift = 0;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned ch
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
-extern int early_serial_setup(struct uart_port *port);
-
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#define BASE_BAUD (1843200 / 16)
-
#endif /* CONFIG_SERIAL_8250 */
/* An arbitrary time; this can be decreased if reliability looks good */
@@ -110,8 +105,8 @@ void __init plat_setup(void)
o2_serial[0].type = PORT_16550A;
o2_serial[0].line = 0;
o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
- o2_serial[0].flags = STD_COM_FLAGS;
- o2_serial[0].uartclk = BASE_BAUD * 16;
+ o2_serial[0].flags = UPF_SKIP_TEST;
+ o2_serial[0].uartclk = 1843200;
o2_serial[0].iotype = UPIO_MEM;
o2_serial[0].membase = (char *)&mace->isa.serial1;
o2_serial[0].fifosize = 14;
@@ -121,8 +116,8 @@ void __init plat_setup(void)
o2_serial[1].type = PORT_16550A;
o2_serial[1].line = 1;
o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
- o2_serial[1].flags = STD_COM_FLAGS;
- o2_serial[1].uartclk = BASE_BAUD * 16;
+ o2_serial[1].flags = UPF_SKIP_TEST;
+ o2_serial[1].uartclk = 1843200;
o2_serial[1].iotype = UPIO_MEM;
o2_serial[1].membase = (char *)&mace->isa.serial2;
o2_serial[1].fifosize = 14;
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -332,8 +332,8 @@ bamboo_early_serial_map(void)
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -97,8 +97,8 @@ bubinga_early_serial_map(void)
port.irq = ACTING_UART0_INT;
port.uartclk = uart_clock;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -225,8 +225,8 @@ ebony_early_serial_map(void)
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -279,8 +279,8 @@ luan_early_serial_map(void)
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -248,8 +248,8 @@ ocotea_early_serial_map(void)
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -95,8 +95,8 @@ ml300_early_serial_map(void)
port.irq = old_ports[i].irq;
port.uartclk = old_ports[i].baud_base * 16;
port.regshift = old_ports[i].iomem_reg_shift;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = i;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -305,8 +305,8 @@ yucca_early_serial_map(void)
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -176,8 +176,8 @@ spruce_early_serial_map(void)
memset(&serial_req, 0, sizeof(serial_req));
serial_req.uartclk = uart_clk;
serial_req.irq = UART0_INT;
- serial_req.flags = ASYNC_BOOT_AUTOCONF;
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.flags = UPF_BOOT_AUTOCONF;
+ serial_req.iotype = UPIO_MEM;
serial_req.membase = (u_char *)UART0_IO_BASE;
serial_req.regshift = 0;
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_
}
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
port->ip_sscr |= IOC4_SSCR_HFC_EN;
}
else {
- info->flags &= ~ASYNC_CTS_FLOW;
port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
}
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
@@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(stru
info = the_port->info;
- if (info->tty) {
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
- }
local_open(port);
/* set the speed of the serial port */
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -80,7 +80,7 @@
#include <asm/serial.h>
/* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
-------------- next part --------------
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -139,7 +139,7 @@ void __init plat_setup(void)
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
uart.irq = COBALT_SERIAL_IRQ;
- uart.flags = STD_COM_FLAGS;
+ uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
uart.iobase = 0xc800000;
uart.iotype = UPIO_PORT;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -134,8 +134,8 @@ void __init serial_init(void)
memset(&s, 0, sizeof(s));
- s.flags = STD_COM_FLAGS;
- s.iotype = SERIAL_IO_MEM;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
if (mips_machtype == MACH_LASAT_100) {
s.uartclk = LASAT_BASE_BAUD_100 * 16;
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -82,8 +82,8 @@ static void __init serial_init(void)
#endif
s.irq = ATLASINT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = SERIAL_IO_PORT;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -71,8 +71,8 @@ static void __init serial_init(void)
#endif
s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
s.uartclk = SEAD_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = 0;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
--- a/arch/mips/mips-boards/sim/sim_setup.c
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -88,8 +88,8 @@ static void __init serial_init(void)
but poll for now */
s.irq = 0;
s.uartclk = BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
- s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_PORT;
s.regshift = 0;
s.timeout = 4;
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ b/arch/mips/momentum/jaguar_atx/ja-console.c
@@ -93,7 +93,7 @@ static void inline ja_console_probe(void
up.uartclk = JAGUAR_ATX_UART_CLK;
up.regshift = 2;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -185,7 +185,7 @@ static void __init py_uart_setup(void)
up.uartclk = TITAN_UART_CLK;
up.regshift = 0;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned ch
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
-extern int early_serial_setup(struct uart_port *port);
-
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#define BASE_BAUD (1843200 / 16)
-
#endif /* CONFIG_SERIAL_8250 */
/* An arbitrary time; this can be decreased if reliability looks good */
@@ -110,8 +105,8 @@ void __init plat_setup(void)
o2_serial[0].type = PORT_16550A;
o2_serial[0].line = 0;
o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
- o2_serial[0].flags = STD_COM_FLAGS;
- o2_serial[0].uartclk = BASE_BAUD * 16;
+ o2_serial[0].flags = UPF_SKIP_TEST;
+ o2_serial[0].uartclk = 1843200;
o2_serial[0].iotype = UPIO_MEM;
o2_serial[0].membase = (char *)&mace->isa.serial1;
o2_serial[0].fifosize = 14;
@@ -121,8 +116,8 @@ void __init plat_setup(void)
o2_serial[1].type = PORT_16550A;
o2_serial[1].line = 1;
o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
- o2_serial[1].flags = STD_COM_FLAGS;
- o2_serial[1].uartclk = BASE_BAUD * 16;
+ o2_serial[1].flags = UPF_SKIP_TEST;
+ o2_serial[1].uartclk = 1843200;
o2_serial[1].iotype = UPIO_MEM;
o2_serial[1].membase = (char *)&mace->isa.serial2;
o2_serial[1].fifosize = 14;
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -332,8 +332,8 @@ bamboo_early_serial_map(void)
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -97,8 +97,8 @@ bubinga_early_serial_map(void)
port.irq = ACTING_UART0_INT;
port.uartclk = uart_clock;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -225,8 +225,8 @@ ebony_early_serial_map(void)
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -279,8 +279,8 @@ luan_early_serial_map(void)
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -248,8 +248,8 @@ ocotea_early_serial_map(void)
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -95,8 +95,8 @@ ml300_early_serial_map(void)
port.irq = old_ports[i].irq;
port.uartclk = old_ports[i].baud_base * 16;
port.regshift = old_ports[i].iomem_reg_shift;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = i;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -305,8 +305,8 @@ yucca_early_serial_map(void)
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -176,8 +176,8 @@ spruce_early_serial_map(void)
memset(&serial_req, 0, sizeof(serial_req));
serial_req.uartclk = uart_clk;
serial_req.irq = UART0_INT;
- serial_req.flags = ASYNC_BOOT_AUTOCONF;
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.flags = UPF_BOOT_AUTOCONF;
+ serial_req.iotype = UPIO_MEM;
serial_req.membase = (u_char *)UART0_IO_BASE;
serial_req.regshift = 0;
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_
}
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
port->ip_sscr |= IOC4_SSCR_HFC_EN;
}
else {
- info->flags &= ~ASYNC_CTS_FLOW;
port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
}
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
@@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(stru
info = the_port->info;
- if (info->tty) {
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
- }
local_open(port);
/* set the speed of the serial port */
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -80,7 +80,7 @@
#include <asm/serial.h>
/* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
More information about the Linuxppc-dev
mailing list