[PATCH] [POWERPC] Add mpc52xx/lite5200 PCI support
Grant Likely
grant.likely at secretlab.ca
Wed Dec 13 09:13:19 EST 2006
Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---
arch/powerpc/Kconfig | 17 ++-
arch/powerpc/platforms/52xx/Makefile | 1 +
arch/powerpc/platforms/52xx/lite5200.c | 6 +
arch/powerpc/platforms/52xx/mpc52xx_pci.c | 412 +++++++++++++++++++++++++++++
include/asm-powerpc/mpc52xx.h | 2 +
5 files changed, 437 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8699dad..f3a3375 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -429,6 +429,21 @@ config PPC_MPC52xx
bool
default n
+config PPC_MPC5200
+ bool
+ select PPC_MPC52xx
+ default n
+
+config PPC_MPC5200_BUGFIX
+ bool "MPC5200 (L25R) bugfix support"
+ depends on PPC_MPC5200
+ default n
+ help
+ Enable workarounds for original MPC5200 errata. This is not required
+ for MPC5200B based boards.
+
+ It is safe to say 'Y' here
+
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
depends on PPC_MULTIPLATFORM && PPC32
@@ -441,7 +456,7 @@ config PPC_EFIKA
config PPC_LITE5200
bool "Freescale Lite5200 Eval Board"
depends on PPC_MULTIPLATFORM && PPC32
- select PPC_MPC52xx
+ select PPC_MPC5200
default n
config PPC_PMAC
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index a46184a..795b713 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -3,6 +3,7 @@ # Makefile for 52xx based boards
#
ifeq ($(CONFIG_PPC_MERGE),y)
obj-y += mpc52xx_pic.o mpc52xx_common.o
+obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index eaff71e..28ec536 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -107,6 +107,12 @@ static void __init lite52xx_setup_arch(v
mpc52xx_setup_cpu(); /* Generic */
lite52xx_setup_cpu(); /* Platorm specific */
+#ifdef CONFIG_PCI
+ np = of_find_node_by_type(np, "pci");
+ if (np)
+ mpc52xx_add_bridge(np);
+#endif
+
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
new file mode 100644
index 0000000..faf161b
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -0,0 +1,412 @@
+/*
+ * PCI code for the Freescale MPC52xx embedded CPU.
+ *
+ * Copyright (C) 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely at secretlab.ca>
+ * Copyright (C) 2004 Sylvain Munaut <tnt at 246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#undef DEBUG
+
+#include <asm/pci.h>
+#include <asm/mpc52xx.h>
+#include <asm/delay.h>
+#include <asm/machdep.h>
+#include <linux/kernel.h>
+
+
+/* ======================================================================== */
+/* PCI windows config */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_TARGET_IO 0xf0000000
+#define MPC52xx_PCI_TARGET_MEM 0x00000000
+
+
+/* ======================================================================== */
+/* Structures mapping & Defines for PCI Unit */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_GSCR_BM 0x40000000
+#define MPC52xx_PCI_GSCR_PE 0x20000000
+#define MPC52xx_PCI_GSCR_SE 0x10000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_MASK 0x07000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT 24
+#define MPC52xx_PCI_GSCR_IPG2PCI_MASK 0x00070000
+#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT 16
+#define MPC52xx_PCI_GSCR_BME 0x00004000
+#define MPC52xx_PCI_GSCR_PEE 0x00002000
+#define MPC52xx_PCI_GSCR_SEE 0x00001000
+#define MPC52xx_PCI_GSCR_PR 0x00000001
+
+
+#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size) \
+ ( ( (proc_ad) & 0xff000000 ) | \
+ ( (((size) - 1) >> 8) & 0x00ff0000 ) | \
+ ( ((pci_ad) >> 16) & 0x0000ff00 ) )
+
+#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2) (((win0) << 24) | \
+ ((win1) << 16) | \
+ ((win2) << 8))
+
+#define MPC52xx_PCI_IWCR_DISABLE 0x0
+#define MPC52xx_PCI_IWCR_ENABLE 0x1
+#define MPC52xx_PCI_IWCR_READ 0x0
+#define MPC52xx_PCI_IWCR_READ_LINE 0x2
+#define MPC52xx_PCI_IWCR_READ_MULTI 0x4
+#define MPC52xx_PCI_IWCR_MEM 0x0
+#define MPC52xx_PCI_IWCR_IO 0x8
+
+#define MPC52xx_PCI_TCR_P 0x01000000
+#define MPC52xx_PCI_TCR_LD 0x00010000
+
+#define MPC52xx_PCI_TBATR_DISABLE 0x0
+#define MPC52xx_PCI_TBATR_ENABLE 0x1
+
+struct mpc52xx_pci {
+ u32 idr; /* PCI + 0x00 */
+ u32 scr; /* PCI + 0x04 */
+ u32 ccrir; /* PCI + 0x08 */
+ u32 cr1; /* PCI + 0x0C */
+ u32 bar0; /* PCI + 0x10 */
+ u32 bar1; /* PCI + 0x14 */
+ u8 reserved1[16]; /* PCI + 0x18 */
+ u32 ccpr; /* PCI + 0x28 */
+ u32 sid; /* PCI + 0x2C */
+ u32 erbar; /* PCI + 0x30 */
+ u32 cpr; /* PCI + 0x34 */
+ u8 reserved2[4]; /* PCI + 0x38 */
+ u32 cr2; /* PCI + 0x3C */
+ u8 reserved3[32]; /* PCI + 0x40 */
+ u32 gscr; /* PCI + 0x60 */
+ u32 tbatr0; /* PCI + 0x64 */
+ u32 tbatr1; /* PCI + 0x68 */
+ u32 tcr; /* PCI + 0x6C */
+ u32 iw0btar; /* PCI + 0x70 */
+ u32 iw1btar; /* PCI + 0x74 */
+ u32 iw2btar; /* PCI + 0x78 */
+ u8 reserved4[4]; /* PCI + 0x7C */
+ u32 iwcr; /* PCI + 0x80 */
+ u32 icr; /* PCI + 0x84 */
+ u32 isr; /* PCI + 0x88 */
+ u32 arb; /* PCI + 0x8C */
+ u8 reserved5[104]; /* PCI + 0x90 */
+ u32 car; /* PCI + 0xF8 */
+ u8 reserved6[4]; /* PCI + 0xFC */
+};
+
+
+/* ======================================================================== */
+/* PCI configuration acess */
+/* ======================================================================== */
+
+static int
+mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ u32 value;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ out_be32(hose->cfg_addr,
+ (1 << 31) |
+ ((bus->number - hose->bus_offset) << 16) |
+ (devfn << 8) |
+ (offset & 0xfc));
+ mb();
+
+#if defined(CONFIG_PPC_MPC5200_BUGFIX)
+ if (bus->number != hose->bus_offset) {
+ /* workaround for the bug 435 of the MPC5200 (L25R);
+ * Don't do 32 bits config access during type-1 cycles */
+ switch (len) {
+ case 1:
+ value = in_8(((u8 __iomem *)hose->cfg_data) +
+ (offset & 3));
+ break;
+ case 2:
+ value = in_le16(((u16 __iomem *)hose->cfg_data) +
+ ((offset>>1) & 1));
+ break;
+
+ default:
+ value = in_le16((u16 __iomem *)hose->cfg_data) |
+ (in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
+ break;
+ }
+ }
+ else
+#endif
+ {
+ value = in_le32(hose->cfg_data);
+
+ if (len != 4) {
+ value >>= ((offset & 0x3) << 3);
+ value &= 0xffffffff >> (32 - (len << 3));
+ }
+ }
+
+ *val = value;
+
+ out_be32(hose->cfg_addr, 0);
+ mb();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ u32 value, mask;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ out_be32(hose->cfg_addr,
+ (1 << 31) |
+ ((bus->number - hose->bus_offset) << 16) |
+ (devfn << 8) |
+ (offset & 0xfc));
+ mb();
+
+#if defined(CONFIG_PPC_MPC5200_BUGFIX)
+ if (bus->number != hose->bus_offset) {
+ /* workaround for the bug 435 of the MPC5200 (L25R);
+ * Don't do 32 bits config access during type-1 cycles */
+ switch (len) {
+ case 1:
+ out_8(((u8 __iomem *)hose->cfg_data) +
+ (offset & 3), val);
+ break;
+ case 2:
+ out_le16(((u16 __iomem *)hose->cfg_data) +
+ ((offset>>1) & 1), val);
+ break;
+
+ default:
+ out_le16((u16 __iomem *)hose->cfg_data,
+ (u16)val);
+ out_le16(((u16 __iomem *)hose->cfg_data) + 1,
+ (u16)(val>>16));
+ break;
+ }
+ }
+ else
+#endif
+ {
+ if (len != 4) {
+ value = in_le32(hose->cfg_data);
+
+ offset = (offset & 0x3) << 3;
+ mask = (0xffffffff >> (32 - (len << 3)));
+ mask <<= offset;
+
+ value &= ~mask;
+ val = value | ((val << offset) & mask);
+ }
+
+ out_le32(hose->cfg_data, val);
+ }
+ mb();
+
+ out_be32(hose->cfg_addr, 0);
+ mb();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc52xx_pci_ops = {
+ .read = mpc52xx_pci_read_config,
+ .write = mpc52xx_pci_write_config
+};
+
+
+/* ======================================================================== */
+/* PCI setup */
+/* ======================================================================== */
+
+static void __init
+mpc52xx_pci_setup(struct pci_controller *hose,
+ struct mpc52xx_pci __iomem *pci_regs)
+{
+ struct resource *res;
+ u32 tmp;
+ int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0;
+
+ pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs);
+
+ /* pci_process_bridge_OF_ranges() found all our addresses for us;
+ * now store them in the right places */
+ hose->cfg_addr = &pci_regs->car;
+ hose->cfg_data = hose->io_base_virt;
+
+ /* Control regs */
+ tmp = in_be32(&pci_regs->scr);
+ tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ out_be32(&pci_regs->scr, tmp);
+
+ /* Memory windows */
+ res = &hose->mem_resources[0];
+ if (res->flags) {
+ pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
+ res->start, res->end, res->flags);
+ out_be32(&pci_regs->iw0btar,
+ MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
+ res->end - res->start + 1));
+ iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
+ if (res->flags & IORESOURCE_PREFETCH)
+ iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI;
+ else
+ iwcr0 |= MPC52xx_PCI_IWCR_READ;
+ }
+
+ res = &hose->mem_resources[1];
+ if (res->flags) {
+ pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
+ res->start, res->end, res->flags);
+ out_be32(&pci_regs->iw1btar,
+ MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
+ res->end - res->start + 1));
+ iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
+ if (res->flags & IORESOURCE_PREFETCH)
+ iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI;
+ else
+ iwcr1 |= MPC52xx_PCI_IWCR_READ;
+ }
+
+ /* IO resources */
+ res = &hose->io_resource;
+ if (!res) {
+ printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
+ return;
+ }
+ pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+ ".io_base_phys=0x%p\n",
+ res->start, res->end, res->flags, (void*)hose->io_base_phys);
+ out_be32(&pci_regs->iw2btar,
+ MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
+ res->start,
+ res->end - res->start + 1));
+ iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO;
+
+ /* Set all the IWCR fields at once; they're in the same reg */
+ out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2));
+
+ out_be32(&pci_regs->tbatr0,
+ MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
+ out_be32(&pci_regs->tbatr1,
+ MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
+
+ out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+
+ tmp = in_be32(&pci_regs->gscr);
+#if 0
+ /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
+ /* Not necessary and can be a bad thing if for example the bootloader
+ is displaying a splash screen or ... Just left here for
+ documentation purpose if anyone need it */
+ out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
+ udelay(50);
+#endif
+
+ /* Make sure the PCI bridge is out of reset */
+ out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
+}
+
+static void
+mpc52xx_pci_fixup_resources(struct pci_dev *dev)
+{
+ int i;
+
+ pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n",
+ dev->vendor, dev->device);
+
+ /* We don't rely on boot loader for PCI and resets all
+ devices */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ struct resource *res = &dev->resource[i];
+ if (res->end > res->start) { /* Only valid resources */
+ res->end -= res->start;
+ res->start = 0;
+ res->flags |= IORESOURCE_UNSET;
+ }
+ }
+
+ /* The PCI Host bridge of MPC52xx has a prefetch memory resource
+ fixed to 1Gb. Doesn't fit in the resource system so we remove it */
+ if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
+ ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
+ || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
+ struct resource *res = &dev->resource[1];
+ res->start = res->end = res->flags = 0;
+ }
+}
+
+int __init
+mpc52xx_add_bridge(struct device_node *node)
+{
+ int len;
+ struct mpc52xx_pci __iomem *pci_regs;
+ struct pci_controller *hose;
+ const int *bus_range;
+ struct resource rsrc;
+
+ pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name);
+
+ pci_assign_all_buses = 1;
+
+ if (of_address_to_resource(node, 0, &rsrc) != 0) {
+ printk(KERN_ERR "Can't get %s resources\n", node->full_name);
+ return -EINVAL;
+ }
+
+ bus_range = get_property(node, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n",
+ node->full_name);
+ bus_range = NULL;
+ }
+
+ /* There are some PCI quirks on the 52xx, register the hook to
+ * fix them. */
+ ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
+
+ /* Alloc and initialize the pci controller. Values in the device
+ * tree are needed to configure the 52xx PCI controller. Rather
+ * than parse the tree here, let pci_process_bridge_OF_ranges()
+ * do it for us and extract the values after the fact */
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+
+ hose->arch_data = node;
+ hose->set_cfg_type = 1;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ hose->bus_offset = 0;
+ hose->ops = &mpc52xx_pci_ops;
+
+ pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
+ if (!pci_regs)
+ return -ENOMEM;
+
+ pci_process_bridge_OF_ranges(hose, node, 1);
+
+ /* Finish setting up PCI using values obtained by
+ * pci_proces_bridge_OF_ranges */
+ mpc52xx_pci_setup(hose, pci_regs);
+
+ return 0;
+}
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index 4a28a85..2f2a025 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -248,6 +248,8 @@ extern void mpc52xx_setup_cpu(void);
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
+extern int __init mpc52xx_add_bridge(struct device_node *node);
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_POWERPC_MPC52xx_H__ */
--
1.4.3.rc2.g0503
More information about the Linuxppc-dev
mailing list