The kernel halt after "transferring control to linux(0x000000)..." on HD860(MPC860SR) board kernel 2.4.25,and 2.6.12

FCG WANG Baohua Baohua.WANG at
Fri Aug 5 11:11:25 EST 2005

Dear Gala:
  I meet a problem when porting kernel  2.4.25,and 2.6.12 to a HD860 board: Whatever your config, or whatever you patch, set ppcboot enviroment, 
  whether use ramdisk or nfs, the kernel  all display a message then halt.
  "transferring control to linux (0x000000) ..."
  The log_buf in Memory display that the kernel has problem at : 

  1. /init/main.c  calibrate_delay() ;
  2. /init/main.c  do_initcalls() do while dead loop!! 
  3. /init/do_mounts.c mount_root() 
 Does it need any patches? thanks!
 The kernel 2.4.25 is from ELDK 3.1.1, is from


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <>

More information about the Linuxppc-dev mailing list