pppd modem problem (2.4.0-test7 lombard)

[Bernhard Reiter]

(Just again for the mailinglist:)

The new pppd worked.
Thanks again,
	Bernhard

On Sat, Sep 02, 2000 at 12:30:47PM +0200, Andreas Tobler wrote:
> Bernhard Reiter wrote:
> 
> > I am using pppd 2.3.10 and
> 
> [snip] 
> 
> > I also have the problem that after that sometimes, the ttS0 port cannot
> > be opened anymore.
> > 
> > Am I missing something obvious here?
> 
> May an update to pppd-2.4.0 would be an idea. I run here almost the latest dev
> kernels on my wallstreet and I have no problems using pppd with ttyS0.
> 
> The pkg you'll find here: ftp://linuxcare.com.au/pub/ppp/
> It is a tar.gz, if you prefer an rpm then I attach the spec file. With this spec
> file and the source you can build your own rpm with rpm -ba file.spec (-ba
> stands for binary, all. The binary rpm and the src.rpm will be built. This has
> to be done in the appropriate place)
> 
> If the spec is ok?? Don't know for me it works.
> 
> Good luck
> 
> Andreas


-- 
Professional Service around Free Software                (intevation.net)  
The FreeGIS Project				            (freegis.org)
Association for a Free Informational Infrastructure            (ffii.org)