XFree 4.0 dual monitor on AGP G4
W. Taylor Holliday
wtholliday at ucdavis.edu
Thu Apr 27 08:54:18 EST 2000
> Care to post a lspci -vv log?
>
> Michael
noprob, here it is
00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 set, cache line size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-87ffffff
Prefetchable memory behind bridge: 0000000080000000-000000007ff00000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:10.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5246
Subsystem: Unknown device b530:0408
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 8 min, 255 set, cache line size 08
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 94000000 (32-bit, prefetchable)
Region 1: I/O ports at 0400 [disabled]
Region 2: Memory at 90000000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
01:02.0 SCSI storage controller: Adaptec AIC-7850 (rev 03)
Subsystem: Unknown device 9004:7850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 4 min, 4 max, 16 set, cache line size 08
Interrupt: pin A routed to IRQ 52
Region 0: I/O ports at <unassigned>
Region 1: Memory at 80084000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
01:03.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5245
Subsystem: Unknown device b530:0408
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 8 min, 16 set, cache line size 08
Interrupt: pin A routed to IRQ 53
Region 0: Memory at 84000000 (32-bit, prefetchable)
Region 1: I/O ports at 1000 [disabled]
Region 2: Memory at 8008c000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
01:07.0 Class ff00: Apple Computer Inc.: Unknown device 0022 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16 set, cache line size 08
Region 0: Memory at 80000000 (32-bit, non-prefetchable)
01:08.0 USB Controller: Apple Computer Inc.: Unknown device 0019 (prog-if
10)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 3 min, 86 max, 16 set
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80083000 (32-bit, non-prefetchable)
01:09.0 USB Controller: Apple Computer Inc.: Unknown device 0019 (prog-if
10)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 3 min, 86 max, 16 set
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80082000 (32-bit, non-prefetchable)
01:0a.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8019
(prog-if 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [disabled]
Region 1: Memory at 80088000 (32-bit, non-prefetchable) [disabled]
Capabilities: <available only to root>
01:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 20 min, 40 max, 96 set, cache line size 08
Interrupt: pin A routed to IRQ 58
Region 0: I/O ports at 1000
Region 1: Memory at 80080000 (32-bit, non-prefetchable) [disabled]
Capabilities: <available only to root>
Thanx again for your help
(I think I previously posted my /proc/pci if u need it)
- Taylor
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-dev
mailing list