egcs-1.1.2-RPM

[Anirudh Joshi]

these were built against glibc2


ftp://linuxppc.slackers.cx/pub/rawhide/ppc/RedHat/RPMS/egcs-1.1.2-8c.ppc.rpm
ftp://linuxppc.slackers.cx/pub/rawhide/ppc/RedHat/RPMS/egcs-c++-1.1.2-8c.ppc.rpm
ftp://linuxppc.slackers.cx/pub/rawhide/ppc/RedHat/RPMS/egcs-g77-1.1.2-8c.ppc.rpm
ftp://linuxppc.slackers.cx/pub/rawhide/ppc/RedHat/RPMS/egcs-objc-1.1.2-8c.ppc.rpm
ftp://linuxppc.slackers.cx/pub/rawhide/ppc/RedHat/RPMS/cpp-1.1.2-8c.ppc.rpm
ftp://linuxppc.slackers.cx/pub/rawhide/ppc/RedHat/RPMS/libstdc++-2.9.0-8c.ppc.rpm

btw, also available: glibc-2.1.1-0a.pre1.ppc.rpm


ani


On Wed, 17 Mar 1999, Andreas Tobler wrote:

> 
> Hi,
> 
> maybe a dump question, is anybody working on a RPM for
> egcs-1.1.2-glibc1.99? And or egcs-1.1.2-glibc-2.1.
> If not can I try it by adapting a RPM from a earlier release? I never
> made a RPM from scratch, I only modified them.
> 
> Yesterday, I built egcs-1.1.2 under R4.1. It worked out of the box?! Now
> I have to compare the test results. I can't believe it, before I had so
> many troubles building an egcs directly from egcs.cygnus.com.
> 
> A last question, what are the minimal requirements to build egcs under
> pre-R5. Means glibc etc.
> 
> Thanks
> Andreas
> -- 
> | Andreas Tobler				
> | CH-8004 Zuerich 							
> | E-Mail: andreas.tobler at alcatel.ch	| a.tobler at schweiz.ch
> -----------------------------------------------------------
> 


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]