G3 Upgrade Questions....
Takayuki Yamaizumi
zumi at yamato.ibm.co.jp
Thu Jul 29 14:46:26 EST 1999
Hi, Jeremy & Paul,
jeremy> On 28-Jul-99 Paul Mackerras wrote:
>> Yeah, reading the temperature isn't actually implemented yet.
jeremy> I've got a patch. I polish it up and send it out soon.
I have also created another patch, but not polished :-) This patch
is relative to the latest 2.2.10 vger kernel.
It works like the following on my PowerBook G3 (266MHz/14.1inch
screen), but I can't check CPU's "real" tempetature, I am not sure
this value is correct.
ty at asama{pts/4}(~)[14:06]: cat /proc/cpuinfo
processor : 0
cpu : 750
temperature : 47 C
clock : 264MHz
revision : 2.2
bogomips : 532.48
zero pages : total 0 (0Kb) current: 0 (0Kb) hits: 0/190 (0%)
machine : PowerBook
motherboard : AAPL,PowerBook1998 MacRISC
L2 cache : 1024K unified pipelined-syncro-burst
memory : 128MB
Hope this works & helps,
--
Takayuki Yamaizumi
Software Development Lab. IBM Japan.
E-mail: ty at kamoi.imasy.or.jp, ty at tokusen.org (Home)
zumi at yamato.ibm.co.jp (Office)
--- linux/arch/ppc/kernel/setup.c.ORG Wed Jul 28 19:35:25 1999
+++ linux/arch/ppc/kernel/setup.c Wed Jul 28 19:37:21 1999
@@ -167,33 +167,117 @@
}
#endif
+/* This is a temporary definition which should be configurable *
+ * from "make config" and some. - Takayuki Yamaizumi *
+ * <ty at kamoi.imasy.or.jp> */
+
+#define CONFIG_PPC750_CPUTEMP
+
+#ifdef CONFIG_PPC750_CPUTEMP
+/* From drivers/ap1000/apfddi.c */
+u_char cpu_temp_bitrev[256] = {
+ 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+ 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+ 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+ 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+ 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+ 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+ 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+ 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+ 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+ 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+ 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+ 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+ 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+ 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+ 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+ 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+ 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+ 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+ 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+ 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+ 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+ 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+ 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+ 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+ 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+ 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+ 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+ 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+ 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+ 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+ 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+ 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+
+#define bit_reverse32(x) \
+ (((__u32) cpu_temp_bitrev[((x) & 0xff000000UL) >> 24]) | \
+ ((__u32) cpu_temp_bitrev[((x) & 0x00ff0000UL) >> 16] << 8) | \
+ ((__u32) cpu_temp_bitrev[((x) & 0x0000ff00UL) >> 8] << 16) | \
+ ((__u32) cpu_temp_bitrev[((x) & 0x000000ffUL)] << 24))
+
+#endif /* CONFIG_PPC750_CPUTEMP */
+
unsigned long cpu_temp(void)
{
- unsigned char thres = 0;
+#ifdef CONFIG_PPC750_CPUTEMP
+
+ int thres = 0;
+ unsigned char flg = 0;
+ unsigned long othrm1, thrm3, thrm1, in_thrm1;
+ int sanity;
+
+ extern void _set_THRM1(unsigned long);
+ extern void _set_THRM2(unsigned long);
+ extern void _set_THRM3(unsigned long);
+ extern unsigned long _get_THRM1(void);
+ extern unsigned long _get_THRM2(void);
+ extern unsigned long _get_THRM3(void);
-#if 0
/* disable thrm2 */
_set_THRM2( 0 );
/* threshold 0 C, tid: exceeding threshold, tie: don't generate interrupt */
- _set_THRM1( THRM1_V );
-
/* we need 20us to do the compare - assume 300MHz processor clock */
_set_THRM3(0);
- _set_THRM3(THRM3_E | (300*30)<<18 );
- udelay(100);
+ thrm3 = bit_reverse32(THRM3_E | ((300*21)<<18));
+ _set_THRM3(thrm3);
+
+ for (thres = 127, flg = 0; thres >= 0 && flg == 0; thres--) {
+ in_thrm1 = (bit_reverse32(THRM1_V | THRM1_TID) | (thres<<23));
+ _set_THRM1(in_thrm1);
+
/* wait for the compare to complete */
- /*while ( !(_get_THRM1() & THRM1_TIV) ) ;*/
- if ( !(_get_THRM1() & THRM1_TIV) )
- printk("no tiv\n");
- if ( _get_THRM1() & THRM1_TIN )
- printk("crossed\n");
+ sanity = 30000;
+ othrm1 = _get_THRM1();
+ thrm1 = bit_reverse32(othrm1);
+
+ while ( (!(thrm1 & THRM1_TIV)) && (sanity-- >= 0) ) {
+ udelay(1);
+ othrm1 = _get_THRM1();
+ thrm1 = bit_reverse32(othrm1);
+ }
+ if (sanity < 0) printk("no sanity\n");
+
+ if ( !(thrm1 & THRM1_TIN) ) {
+ printk(KERN_DEBUG "not crossed temp = %d C: This may be a current temperature.\n", thres);
+ flg++;
+ }
+#if 0
+ else
+ printk("crossed temp = %d C\n", thres);
+#endif
+
+ }
/* turn everything off */
_set_THRM3(0);
_set_THRM1(0);
+
+ return ++thres;
+#else
+
+ return 0;
#endif
-
- return thres;
}
int get_cpuinfo(char *buffer)
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
More information about the Linuxppc-dev
mailing list