SANE

[Brian C Burke]

>Brad Midgley <brad at pht.com> wrote
> >> concluded that the problem was either with the scsi generic driver (sg),
> >> or with the scsi driver (53C94).
>
> >i remember paul saying something about no reconnect support back when we
> >were trying to get cdrecord to work.
>
> >could someone with an adaptec scsi card try sane?
>
>For what its worth, I have SANE 1.0.1 working without problems with 
>R5 and kernel 2.2.10 which I compiled with the sg drivers. The 
>machine is a rev1 G3 233 with a UMAX 610s on the internal scsi bus.

  Brian


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]