Booting 2.2.0-pre6 on a PowerStack-II (Net 4000/200)

[Johnnie Peters]

I will pull this down today and give it a try.

Johnnie


Gary Thomas wrote:

> On 20-Jan-99 Johnnie Peters wrote:
> >
> > I will volunteer to try the patches on:
> >
> > Blackhawk
> > Comet
> > Utah
> > Mequite
> > MTX
> > VME2600/2700/3600
> >
> > just as soon as they are available.
> >
>
> I have put up all my patches against 2.2.0p7 at:
>   ftp://ftp.linuxppc.org/gary/diffs-2.2.0p7-Jan20
> These are diffs against the virgin 2.2.0-pre7.
>
> This includes the changes to fix boot problems on my Utah box,
> as well as the changes to get the PS/2 mouse working again.
>
> I also did some restructuring of the PPC main configuration menu
> so that Pmac questions are ignored if you aren't configuring for
> a PowerMac.  I also added a configuration option to set the default
> kernel boot line, passed to the bootstrap code.
>
> Note: I have had persistent problems with the cache test in the
> NCR driver.  It seems to work fine if I just ignore it, so I also
> left it that way.  I also had to "tone down" the driver a lot,
> the default of WIDE+20Mhz just doesn't cut it on my drives :-)
>
> ------------------------------------------------------------------------
> Gary Thomas                              |
> email: gdt at linuxppc.org                  | "Fine wine is a necessity of
>    ... opinions expressed here are mine  |        life for me"
>        and no one else would claim them! |
>                                          |      Thomas Jefferson
> ------------------------------------------------------------------------




[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request at lists.linuxppc.org ]]