[PATCH v1 3/4] ARM: dts: aspeed: harma: add sq52206 power monitor device

[Peter Yin]

Add the SQ52206 power monitor device and reorder the sequence.

Signed-off-by: Peter Yin <peteryin.openbmc at gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 28 +++++++++++--------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index bcef91e6eb54..fe72d47a7632 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -353,14 +353,15 @@ eeprom at 52 {
 		reg = <0x52>;
 	};
 
-	power-monitor at 69 {
-		compatible = "pmbus";
-		reg = <0x69>;
+	power-monitor at 40 {
+		compatible = "infineon,xdp710";
+		reg = <0x40>;
 	};
 
-	temperature-sensor at 49 {
-		compatible = "ti,tmp75";
-		reg = <0x49>;
+	power-monitor at 41 {
+		compatible = "silergy,sq52206";
+		reg = <0x41>;
+		shunt-resistor = <500>;
 	};
 
 	power-monitor at 44 {
@@ -369,16 +370,21 @@ power-monitor at 44 {
 		shunt-resistor-micro-ohms = <250>;
 	};
 
-	power-monitor at 40 {
-		compatible = "infineon,xdp710";
-		reg = <0x40>;
-	};
-
 	power-monitor at 45 {
 		compatible = "ti,ina238";
 		reg = <0x45>;
 		shunt-resistor = <500>;
 	};
+
+	power-monitor at 69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor at 49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
 };
 
 &i2c5 {
-- 
2.43.0