[PATCH v1 2/4] ARM: dts: aspeed: harma: use power-monitor instead of power-sensor

[Peter Yin]

Revise the node name from "power-sensor" to "power-monitor"
in the Harma device tree to follow Device Tree naming convention.

Signed-off-by: Peter Yin <peteryin.openbmc at gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 41ae86180534..bcef91e6eb54 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -190,25 +190,25 @@ pwm at 5e{
 		#size-cells = <0>;
 	};
 
-	power-sensor at 40 {
+	power-monitor at 40 {
 		compatible = "ti,ina238";
 		reg = <0x40>;
 		shunt-resistor = <1000>;
 	};
 
-	power-sensor at 41 {
+	power-monitor at 41 {
 		compatible = "ti,ina238";
 		reg = <0x41>;
 		shunt-resistor = <1000>;
 	};
 
-	power-sensor at 44 {
+	power-monitor at 44 {
 		compatible = "ti,ina238";
 		reg = <0x44>;
 		shunt-resistor = <1000>;
 	};
 
-	power-sensor at 45 {
+	power-monitor at 45 {
 		compatible = "ti,ina238";
 		reg = <0x45>;
 		shunt-resistor = <1000>;
@@ -264,25 +264,25 @@ pwm at 5e{
 		#size-cells = <0>;
 	};
 
-	power-sensor at 40 {
+	power-monitor at 40 {
 		compatible = "ti,ina238";
 		reg = <0x40>;
 		shunt-resistor = <1000>;
 	};
 
-	power-sensor at 41 {
+	power-monitor at 41 {
 		compatible = "ti,ina238";
 		reg = <0x41>;
 		shunt-resistor = <1000>;
 	};
 
-	power-sensor at 44 {
+	power-monitor at 44 {
 		compatible = "ti,ina238";
 		reg = <0x44>;
 		shunt-resistor = <1000>;
 	};
 
-	power-sensor at 45 {
+	power-monitor at 45 {
 		compatible = "ti,ina238";
 		reg = <0x45>;
 		shunt-resistor = <1000>;
@@ -374,7 +374,7 @@ power-monitor at 40 {
 		reg = <0x40>;
 	};
 
-	power-sensor at 45 {
+	power-monitor at 45 {
 		compatible = "ti,ina238";
 		reg = <0x45>;
 		shunt-resistor = <500>;
@@ -520,7 +520,7 @@ imux28: i2c at 0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			power-sensor at 20 {
+			power-monitor at 20 {
 				compatible = "mps,mp5990";
 				reg = <0x20>;
 			};
-- 
2.43.0