[PATCH v6 4/6] arm64: dts: aspeed: Add initial AST2700 SoC device tree

[Andrew Lunn]

On Mon, Oct 27, 2025 at 02:42:01AM +0000, Ryan Chen wrote:
> > Subject: Re: [PATCH v6 4/6] arm64: dts: aspeed: Add initial AST2700 SoC device
> > tree
> > 
> > > SoC0, referred to as the CPU die, contains a dual-core Cortex-A35
> > > cluster and two Cortex-M4 cores, along with its own clock/reset
> > > domains and high-speed peripheral set.
> > 
> > > SoC1, referred to as the I/O die, contains the Boot MCU and its own
> > > clock/reset domains and low-speed peripheral set, and is responsible
> > > for system boot and control functions.
> > 
> > So is the same .dtsi file shared by both systems? 
> 
> This .dtsi represents the Cortex-A35 view only and is not shared
> with the Cortex-M4 or the Boot MCU side, since they are separate
> 32-bit and 64-bit systems running independent firmware.

DT describes the hardware. The .dtsi file could be shared, you just
need different status = <>; lines in the dtb blob.

> > How do you partition devices
> > so each CPU cluster knows it has exclusive access to which peripherals?
> 
> Before the system is fully brought up, Boot MCU configure hardware 
> controllers handle the resource partitioning to ensure exclusive access.

Are you saying it modifies the .dtb blob and changes some status =
"okay"; to "disabled";?

	Andrew