[PATCH v2 02/10] bindings: ipmi: Add binding for IPMB device intf

[Rob Herring]

On Tue, Jan 07, 2025 at 10:23:39AM -0600, Ninad Palsule wrote:
> Add device tree binding document for the IPMB device interface driver.

Please mention this is already is already in use both in a driver and 
.dts files.

> Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
> ---
>  .../devicetree/bindings/ipmi/ipmb-dev.yaml    | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
> new file mode 100644
> index 000000000000..9136ac8004dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ipmi/ipmb-dev.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IPMB Device Driver

Bindings are for devices, not drivers. Drop 'Driver'. It's a stretch 
that IPMB is even a device, but since there are already a few users, I 
guess we're stuck with it.

> +
> +description: IPMB Device Driver bindings

No point in a description that just repeats the title. Please expand 
this. For example, AIUI, this is for the device end, not the BMC end.

> +
> +maintainers:
> +  - Ninad Palsule <ninad at linux.ibm.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ipmb-dev
> +
> +  reg:
> +    maxItems: 1

As this is the slave end, I2C_OWN_SLAVE_ADDRESS should be set. So:

minimum: 0x40000000
maximum: 0x4000007f

Maybe 10-bit addressing has to be supported too?

> +
> +  i2c-protocol:
> +    description:
> +      This property specifies that the I2C block transfer should be performed
> +      instead of SMBUS block transfer.

This can be more concisely said:

Use I2C block transfer instead of SMBUS block transfer.

> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        i2c at 10 {

'i2c' node name is for i2c buses and this is not one. 'ipmb' is probably 
fine here.

> +            compatible = "ipmb-dev";
> +            reg = <0x10>;
> +            i2c-protocol;
> +        };
> +    };
> -- 
> 2.43.0
>