[PATCH v2 02/10] bindings: ipmi: Add binding for IPMB device intf

[Rob Herring (Arm)]

On Tue, 07 Jan 2025 10:23:39 -0600, Ninad Palsule wrote:
> Add device tree binding document for the IPMB device interface driver.
> 
> Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
> ---
>  .../devicetree/bindings/ipmi/ipmb-dev.yaml    | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:21.17-30: Warning (reg_format): /example-0/i2c/i2c at 10:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:18.13-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:18.13-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:19.20-23.15: Warning (avoid_default_addr_size): /example-0/i2c/i2c at 10: Relying on default #address-cells value
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:19.20-23.15: Warning (avoid_default_addr_size): /example-0/i2c/i2c at 10: Relying on default #size-cells value
Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250107162350.1281165-3-ninad@linux.ibm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.