May 2024 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed May 1 00:30:43 AEST 2024
Ending: Fri May 31 13:02:49 AEST 2024
Messages: 223

• [PATCH v8 1/1] drivers: watchdog: revise watchdog bootstatus   Peter Yin
• [PATCH v9 0/1] watchdog: aspeed: Revise handling of bootstatus   Peter Yin
  • [PATCH v9 1/1] watchdog: aspeed: Revise handling of bootstatus   Peter Yin
    • [PATCH v9 1/1] watchdog: aspeed: Revise handling of bootstatus   Andrew Jeffery
• [PATCH] dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node   Rob Herring (Arm)
  • [PATCH] dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node   Andrew Jeffery
    • [PATCH] dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node   Rob Herring
      • [PATCH] dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node   Andrew Jeffery
  • (subset) [PATCH] dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node   Lee Jones
• [PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers   Jeremy Kerr
  • [PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers   Krzysztof Kozlowski
    • [PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers   Jeremy Kerr
      • [PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers   Krzysztof Kozlowski
      • [PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers   Jeremy Kerr
• [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema   Eddie James
  • [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema   Krzysztof Kozlowski
• [PATCH v4 05/17] dt-bindings: fsi: Document the IBM SBEFIFO engine   Eddie James
• [PATCH v4 06/17] dt-bindings: fsi: Document the FSI controller common properties   Eddie James
• [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema   Eddie James
  • [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema   Krzysztof Kozlowski
    • [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema   Eddie James
• [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema   Eddie James
  • [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema   Krzysztof Kozlowski
• [PATCH v2 2/2] ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMC   Zev Weiss
• [PATCH v3 0/3] ARM: dts: aspeed: Add ASRock E3C256D4I BMC   Zev Weiss
  • [PATCH v3 2/3] dt-bindings: arm: aspeed: document ASRock E3C256D4I   Zev Weiss
  • [PATCH v3 3/3] ARM: dts: aspeed: Add ASRock E3C256D4I BMC   Zev Weiss
  • [PATCH v3 0/3] ARM: dts: aspeed: Add ASRock E3C256D4I BMC   Joel Stanley
• [PATCH v3 1/3] dt-bindings: trivial-devices: add isil,isl69269   Zev Weiss
  • [PATCH v3 1/3] dt-bindings: trivial-devices: add isil,isl69269   Krzysztof Kozlowski
• [PATCH v2 1/2] arm: dts: aspeed-g6: move i2c controllers directly into apb node   Jeremy Kerr
  • [PATCH v2 2/2] arm: dts: aspeed-g6: Add nodes for i3c controllers   Jeremy Kerr
• [GIT PULL] ARM: aspeed: devicetree changes for 6.10   Joel Stanley
• [PATCH 0/2] [RFC] i3c: ast2600: Add MCTP-over-I3C support   Dylan Hung
  • [PATCH 1/2] [RFC] ARM: dts: aspeed-g6: Add AST2600 I3Cs   Dylan Hung
  • [PATCH 2/2] [RFC] i3c: ast2600: Validate AST2600 I3C for MCTP-over-I3C   Dylan Hung
  • [PATCH 0/2] [RFC] i3c: ast2600: Add MCTP-over-I3C support   Jeremy Kerr
• [PATCH v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS   Delphine CC Chiu
  • [PATCH v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS   Krzysztof Kozlowski
    • [PATCH v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS   Delphine_CC_Chiu/WYHQ/Wiwynn
  • [PATCH v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS   kernel test robot
• [PATCH v8 0/2] Change email sender   Andrew Jeffery
• [PATCH v5] dt-bindings: arm: aspeed: add IBM P11 BMC boards   Eddie James
• [PATCH v5 0/4] ARM: dts: aspeed: Add IBM P11 BMC systems   Eddie James
  • [PATCH v5 1/4] ARM: dts: aspeed: Add IBM P11 FSI devices   Eddie James
  • [PATCH v5 2/4] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system   Eddie James
    • [PATCH v5 2/4] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system   Krzysztof Kozlowski
  • [PATCH v5 3/4] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system   Eddie James
  • [PATCH v5 0/4] ARM: dts: aspeed: Add IBM P11 BMC systems   Krzysztof Kozlowski
• [PATCH v3 00/40] fsi: Add interrupt support   Eddie James
  • [PATCH v3 01/40] fsi: hub: Set master index to link number plus one   Eddie James
  • [PATCH v3 03/40] fsi: Fix slave addressing after break command   Eddie James
  • [PATCH v3 05/40] fsi: Calculate local bus clock frequency   Eddie James
  • [PATCH v3 07/40] fsi: core: Add slave error trace   Eddie James
  • [PATCH v3 10/40] fsi: core: Add slave spinlock   Eddie James
  • [PATCH v3 11/40] fsi: core: Allow cfam device type aliases   Eddie James
  • [PATCH v3 12/40] fsi: core: Add common regmap master functions   Eddie James
  • [PATCH v3 13/40] fsi: core: Disable relative addressing during scan   Eddie James
  • [PATCH v3 14/40] fsi: hub: Use common initialization and link enable   Eddie James
  • [PATCH v3 15/40] fsi: aspeed: Use common initialization and link enable   Eddie James
  • [PATCH v3 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove   Eddie James
  • [PATCH v3 17/40] fsi: aspeed: Refactor trace functions   Eddie James
  • [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers   Eddie James
  • [PATCH v3 19/40] fsi: aspeed: Only read result register for successful read   Eddie James
  • [PATCH v3 20/40] fsi: aspeed: Switch to spinlock   Eddie James
  • [PATCH v3 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset   Eddie James
  • [PATCH v3 22/40] fsi: aspeed: Use common master error handler   Eddie James
  • [PATCH v3 23/40] fsi: core: Add interrupt support   Eddie James
    • [PATCH v3 23/40] fsi: core: Add interrupt support   kernel test robot
  • [PATCH v3 24/40] fsi: aspeed: Add interrupt support   Eddie James
  • [PATCH v3 25/40] fsi: hub: Add interrupt support   Eddie James
  • [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency   Eddie James
  • [PATCH v3 27/40] i2c: fsi: Improve formatting   Eddie James
  • [PATCH v3 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer   Eddie James
  • [PATCH v3 29/40] i2c: fsi: Remove list structure of ports   Eddie James
  • [PATCH v3 30/40] i2c: fsi: Define a function to check status error bits   Eddie James
  • [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort   Eddie James
  • [PATCH v3 32/40] i2c: fsi: Add interrupt support   Eddie James
  • [PATCH v3 33/40] fsi: hub master: Reset hub master after errors   Eddie James
  • [PATCH v3 34/40] fsi: core: Add master register read-only sysfs   Eddie James
  • [PATCH v3 35/40] fsi: core: Add slave register read-only sysfs   Eddie James
  • [PATCH v3 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip   Eddie James
  • [PATCH v3 37/40] fsi: core: Add different types of CFAM   Eddie James
    • [PATCH v3 37/40] fsi: core: Add different types of CFAM   kernel test robot
    • [PATCH v3 37/40] fsi: core: Add different types of CFAM   kernel test robot
    • [PATCH v3 37/40] fsi: core: Add different types of CFAM   kernel test robot
  • [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency   Eddie James
    • [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency   Mark Brown
  • [PATCH v3 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency   Eddie James
  • [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies   Eddie James
• [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h   Eddie James
• [PATCH v3 04/40] fsi: Use a defined value for default echo delay   Eddie James
• [PATCH v3 06/40] fsi: core: Improve master read/write/error traces   Eddie James
• [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts   Eddie James
• [PATCH v3 09/40] fsi: aspeed: Add AST2700 support   Eddie James
• [PATCH] ARM: dts: aspeed: convert ASRock SPC621D8HM3 NVMEM content to layout syntax   Rob Herring (Arm)
• [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems   Eddie James
  • [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes   Eddie James
  • [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine   Eddie James
    • [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine   Markus Elfring
      • [v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine   Markus Elfring
  • [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema   Eddie James
    • [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema   Markus Elfring
  • [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine   Eddie James
    • [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine   Markus Elfring
  • [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties   Eddie James
    • [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties   Krzysztof Kozlowski
  • [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller   Eddie James
  • [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema   Eddie James
  • [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller   Eddie James
  • [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller   Eddie James
    • [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller   Ninad Palsule
  • [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema   Eddie James
    • [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema   Krzysztof Kozlowski
    • [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema   Ninad Palsule
  • [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards   Eddie James
    • [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards   Ninad Palsule
  • [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices   Eddie James
    • [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices   Ninad Palsule
  • [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system   Eddie James
    • [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system   Ninad Palsule
      • [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system   Eddie James
  • [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system   Eddie James
    • [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system   Ninad Palsule
  • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Eddie James
    • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   kernel test robot
      • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Eddie James
    • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Markus Elfring
      • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Eddie James
      • [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Markus Elfring
      • [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Conor Dooley
      • [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Markus Elfring
      • [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Al Viro
      • [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Markus Elfring
      • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Krzysztof Kozlowski
      • [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Markus Elfring
    • [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system   Ninad Palsule
  • [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API   Eddie James
    • [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API   Ninad Palsule
  • [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match   Eddie James
  • [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation   Eddie James
    • [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation   Ninad Palsule
    • [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match   Ninad Palsule
  • [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system   Ninad Palsule
    • [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system   Eddie James
• [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller   Eddie James
• [PATCH v8 00/23] Add i2c-mux and eeprom devices for Meta Yosemite 4   Delphine CC Chiu
  • [PATCH v8 01/23] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices   Delphine CC Chiu
  • [PATCH v8 02/23] ARM: dts: aspeed: yosemite4: Enable adc15   Delphine CC Chiu
    • [PATCH v8 02/23] ARM: dts: aspeed: yosemite4: Enable adc15   Delphine CC Chiu
  • [PATCH v8 03/23] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting   Delphine CC Chiu
  • [PATCH v8 04/23] ARM: dts: aspeed: yosemite4: Enable watchdog2   Delphine CC Chiu
  • [PATCH v8 05/23] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode   Delphine CC Chiu
  • [PATCH v8 06/23] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change   Delphine CC Chiu
  • [PATCH v8 07/23] ARM: dts: aspeed: yosemite4: Add gpio pca9506   Delphine CC Chiu
  • [PATCH v8 08/23] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible   Delphine CC Chiu
  • [PATCH v8 09/23] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555   Delphine CC Chiu
  • [PATCH v8 10/23] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading   Delphine CC Chiu
  • [PATCH v8 11/23] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use   Delphine CC Chiu
  • [PATCH v8 12/23] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change   Delphine CC Chiu
  • [PATCH v8 13/23] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change   Delphine CC Chiu
  • [PATCH v8 14/23] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change   Delphine CC Chiu
  • [PATCH v8 15/23] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection   Delphine CC Chiu
  • [PATCH v8 16/23] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state   Delphine CC Chiu
  • [PATCH v8 17/23] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config   Delphine CC Chiu
  • [PATCH v8 18/23] ARM: dts: aspeed: yosemite4: add mctp config for NIC   Delphine CC Chiu
  • [PATCH v8 19/23] ARM: dts: aspeed: yosemite4: support mux to cpld   Delphine CC Chiu
  • [PATCH v8 20/23] ARM: dts: aspeed: yosemite4: support medusa board adc sensors   Delphine CC Chiu
  • [PATCH v8 21/23] ARM: dts: aspeed: yosemite4: support NIC eeprom   Delphine CC Chiu
  • [PATCH v8 22/23] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle   Delphine CC Chiu
  • [PATCH v8 23/23] ARM: dts: aspeed: yosemite4: add fan led config   Delphine CC Chiu
  • [PATCH v8 00/23] Add i2c-mux and eeprom devices for Meta Yosemite 4   Delphine CC Chiu
    • [PATCH v8 01/23] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices   Delphine CC Chiu
    • [PATCH v8 03/23] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting   Delphine CC Chiu
    • [PATCH v8 04/23] ARM: dts: aspeed: yosemite4: Enable watchdog2   Delphine CC Chiu
    • [PATCH v8 05/23] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode   Delphine CC Chiu
    • [PATCH v8 06/23] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change   Delphine CC Chiu
    • [PATCH v8 07/23] ARM: dts: aspeed: yosemite4: Add gpio pca9506   Delphine CC Chiu
    • [PATCH v8 08/23] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible   Delphine CC Chiu
    • [PATCH v8 09/23] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555   Delphine CC Chiu
    • [PATCH v8 10/23] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading   Delphine CC Chiu
    • [PATCH v8 11/23] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use   Delphine CC Chiu
    • [PATCH v8 12/23] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change   Delphine CC Chiu
    • [PATCH v8 13/23] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change   Delphine CC Chiu
    • [PATCH v8 14/23] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change   Delphine CC Chiu
    • [PATCH v8 15/23] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection   Delphine CC Chiu
    • [PATCH v8 16/23] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state   Delphine CC Chiu
    • [PATCH v8 17/23] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config   Delphine CC Chiu
    • [PATCH v8 18/23] ARM: dts: aspeed: yosemite4: add mctp config for NIC   Delphine CC Chiu
    • [PATCH v8 19/23] ARM: dts: aspeed: yosemite4: support mux to cpld   Delphine CC Chiu
    • [PATCH v8 20/23] ARM: dts: aspeed: yosemite4: support medusa board adc sensors   Delphine CC Chiu
    • [PATCH v8 21/23] ARM: dts: aspeed: yosemite4: support NIC eeprom   Delphine CC Chiu
    • [PATCH v8 22/23] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle   Delphine CC Chiu
    • [PATCH v8 23/23] ARM: dts: aspeed: yosemite4: add fan led config   Delphine CC Chiu
    • [PATCH v8 00/23] Add i2c-mux and eeprom devices for Meta Yosemite 4   Andrew Jeffery
• [PATCH v2 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board   Naresh Solanki
  • [PATCH v2 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board   Conor Dooley
• [PATCH 0/6] ipmi: Convert to platform remove callback returning void   Uwe Kleine-König
  • [PATCH 0/6] ipmi: Convert to platform remove callback returning void   Uwe Kleine-König
• [PATCH 0/4] dt-bindings: gpio: aspeed,sgpio: Miscellaneous cleanups   Andrew Jeffery
  • [PATCH 1/4] dt-bindings: gpio: aspeed,sgpio: Order properties by DTS style   Andrew Jeffery
    • [PATCH 1/4] dt-bindings: gpio: aspeed,sgpio: Order properties by DTS style   Krzysztof Kozlowski
      • [PATCH 1/4] dt-bindings: gpio: aspeed,sgpio: Order properties by DTS style   Andrew Jeffery
  • [PATCH 3/4] dt-bindings: gpio: aspeed,sgpio: Specify #interrupt-cells   Andrew Jeffery
    • [PATCH 3/4] dt-bindings: gpio: aspeed,sgpio: Specify #interrupt-cells   Krzysztof Kozlowski
      • [PATCH 3/4] dt-bindings: gpio: aspeed,sgpio: Specify #interrupt-cells   Andrew Jeffery
  • [PATCH 4/4] dt-bindings: gpio: aspeed,sgpio: Require #interrupt-cells   Andrew Jeffery
    • [PATCH 4/4] dt-bindings: gpio: aspeed,sgpio: Require #interrupt-cells   Krzysztof Kozlowski
      • [PATCH 4/4] dt-bindings: gpio: aspeed,sgpio: Require #interrupt-cells   Andrew Jeffery
• [PATCH 2/4] dt-bindings: gpio: aspeed,sgpio: Specify gpio-line-names   Andrew Jeffery
  • [PATCH 2/4] dt-bindings: gpio: aspeed,sgpio: Specify gpio-line-names   Krzysztof Kozlowski
    • [PATCH 2/4] dt-bindings: gpio: aspeed,sgpio: Specify gpio-line-names   Andrew Jeffery
• [PATCH v2 0/2] dt-bindings: gpio: aspeed,sgpio: Miscellaneous cleanups   Andrew Jeffery
  • [PATCH v2 1/2] dt-bindings: gpio: aspeed,sgpio: Specify gpio-line-names   Andrew Jeffery
  • [PATCH v2 2/2] dt-bindings: gpio: aspeed,sgpio: Specify #interrupt-cells   Andrew Jeffery
    • [PATCH v2 2/2] dt-bindings: gpio: aspeed,sgpio: Specify #interrupt-cells   Conor Dooley
• [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs   Tommy Huang
  • [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs   Paul Menzel
    • [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs   Tommy Huang
• [PATCH 0/3] dt-bindings: pinctrl: aspeed: Define missing functions and groups   Andrew Jeffery
• [PATCH 1/3] dt-bindings: pinctrl: aspeed: Use block syntax for function and groups   Andrew Jeffery
• [PATCH 2/3] dt-bindings: pinctrl: aspeed,ast2500-pinctrl: Describe SGPM   Andrew Jeffery
• [PATCH 3/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Describe I3C, USB   Andrew Jeffery

Last message date: Fri May 31 13:02:49 AEST 2024
Archived on: Fri May 31 13:03:23 AEST 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...