[PATCH 1/2] [RFC] ARM: dts: aspeed-g6: Add AST2600 I3Cs

[Dylan Hung]

The AST2600 has 6 I3Cs which are based on dw-i3c along with Aspeed
proprietary enhancements.

Signed-off-by: Dylan Hung <dylan_hung at aspeedtech.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 137 ++++++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 29f94696d8b1..d0d685747b74 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -13,6 +13,12 @@ / {
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i3c0 = &i3c0;
+		i3c1 = &i3c1;
+		i3c2 = &i3c2;
+		i3c3 = &i3c3;
+		i3c4 = &i3c4;
+		i3c5 = &i3c5;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -579,6 +585,13 @@ wdt4: watchdog at 1e7850c0 {
 				status = "disabled";
 			};
 
+			i3c: bus at 1e7a0000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e7a0000 0x8000>;
+			};
+
 			peci0: peci-controller at 1e78b000 {
 				compatible = "aspeed,ast2600-peci";
 				reg = <0x1e78b000 0x100>;
@@ -1125,3 +1138,127 @@ i2c15: i2c-bus at 800 {
 		status = "disabled";
 	};
 };
+
+&i3c {
+	i3c_global: i3c-global {
+		compatible = "aspeed,ast2600-i3c-global", "simple-mfd", "syscon";
+		resets = <&syscon ASPEED_RESET_I3C>;
+		reg = <0x0 0x1000>;
+	};
+
+	i3c0: i3c at 2000 {
+		compatible = "aspeed,ast2600-i3c";
+		reg = <0x2000 0x1000>;
+		clocks = <&syscon ASPEED_CLK_GATE_I3C0CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i3c1_default>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		aspeed,global-regs = <&i3c_global 0>;
+		status = "disabled";
+
+		i2c-scl-hz = <1000000>;
+		i3c-scl-hz = <2000000>;
+		i3c-od-scl-hi-period-ns = <380>;
+		i3c-od-scl-lo-period-ns = <620>;
+		i3c-pp-scl-hi-period-ns = <250>;
+		i3c-pp-scl-lo-period-ns = <250>;
+		sda-tx-hold-ns = <70>;
+		sda-pullup-ohms = <2000>;
+	};
+
+	i3c1: i3c at 3000 {
+		compatible = "aspeed,ast2600-i3c";
+		reg = <0x3000 0x1000>;
+		clocks = <&syscon ASPEED_CLK_GATE_I3C1CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i3c2_default>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		aspeed,global-regs = <&i3c_global 1>;
+		status = "disabled";
+
+		i2c-scl-hz = <1000000>;
+		i3c-scl-hz = <2000000>;
+		i3c-od-scl-hi-period-ns = <380>;
+		i3c-od-scl-lo-period-ns = <620>;
+		i3c-pp-scl-hi-period-ns = <250>;
+		i3c-pp-scl-lo-period-ns = <250>;
+		sda-tx-hold-ns = <70>;
+		sda-pullup-ohms = <2000>;
+	};
+
+	i3c2: i3c at 4000 {
+		compatible = "aspeed,ast2600-i3c";
+		reg = <0x4000 0x1000>;
+		clocks = <&syscon ASPEED_CLK_GATE_I3C2CLK>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		aspeed,global-regs = <&i3c_global 2>;
+		status = "disabled";
+
+		i2c-scl-hz = <1000000>;
+		i3c-scl-hz = <2000000>;
+		i3c-od-scl-hi-period-ns = <380>;
+		i3c-od-scl-lo-period-ns = <620>;
+		i3c-pp-scl-hi-period-ns = <250>;
+		i3c-pp-scl-lo-period-ns = <250>;
+		sda-tx-hold-ns = <70>;
+		sda-pullup-ohms = <2000>;
+	};
+
+	i3c3: i3c at 5000 {
+		compatible = "aspeed,ast2600-i3c";
+		reg = <0x5000 0x1000>;
+		clocks = <&syscon ASPEED_CLK_GATE_I3C3CLK>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		aspeed,global-regs = <&i3c_global 3>;
+		status = "disabled";
+
+		i2c-scl-hz = <1000000>;
+		i3c-scl-hz = <2000000>;
+		i3c-od-scl-hi-period-ns = <380>;
+		i3c-od-scl-lo-period-ns = <620>;
+		i3c-pp-scl-hi-period-ns = <250>;
+		i3c-pp-scl-lo-period-ns = <250>;
+		sda-tx-hold-ns = <70>;
+		sda-pullup-ohms = <2000>;
+	};
+
+	i3c4: i3c at 6000 {
+		compatible = "aspeed,ast2600-i3c";
+		reg = <0x6000 0x1000>;
+		clocks = <&syscon ASPEED_CLK_GATE_I3C4CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i3c5_default>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		aspeed,global-regs = <&i3c_global 4>;
+		status = "disabled";
+
+		i2c-scl-hz = <1000000>;
+		i3c-scl-hz = <2000000>;
+		i3c-od-scl-hi-period-ns = <380>;
+		i3c-od-scl-lo-period-ns = <620>;
+		i3c-pp-scl-hi-period-ns = <250>;
+		i3c-pp-scl-lo-period-ns = <250>;
+		sda-tx-hold-ns = <70>;
+		sda-pullup-ohms = <2000>;
+	};
+
+	i3c5: i3c at 7000 {
+		compatible = "aspeed,ast2600-i3c";
+		reg = <0x7000 0x1000>;
+		clocks = <&syscon ASPEED_CLK_GATE_I3C5CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i3c6_default>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		aspeed,global-regs = <&i3c_global 5>;
+		status = "disabled";
+
+		i2c-scl-hz = <1000000>;
+		i3c-scl-hz = <2000000>;
+		i3c-od-scl-hi-period-ns = <380>;
+		i3c-od-scl-lo-period-ns = <620>;
+		i3c-pp-scl-hi-period-ns = <250>;
+		i3c-pp-scl-lo-period-ns = <250>;
+		sda-tx-hold-ns = <70>;
+		sda-pullup-ohms = <2000>;
+	};
+};
-- 
2.25.1