[PATCH 1/4] dt-bindings: mfd: aspeed: support for AST2700

[Ryan Chen]

> Subject: Re: [PATCH 1/4] dt-bindings: mfd: aspeed: support for AST2700
>
> On 08/08/2024 09:59, Ryan Chen wrote:
> > Add compatible support for AST2700 clk, reset, pinctrl, silicon-id and
> > example for AST2700 scu.
> >
> > Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> > ---
> >  .../bindings/mfd/aspeed,ast2x00-scu.yaml      | 31
> +++++++++++++++++--
> >  1 file changed, 29 insertions(+), 2 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > index 86ee69c0f45b..c0965f08ae8c 100644
> > --- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > @@ -21,6 +21,8 @@ properties:
> >            - aspeed,ast2400-scu
> >            - aspeed,ast2500-scu
> >            - aspeed,ast2600-scu
> > +          - aspeed,ast2700-scu0
> > +          - aspeed,ast2700-scu1
>
> What are the differences between these two?

The next [PATCH 4/4] is scu driver that include ast2700-scu0 and ast2700-scu1
CLK_OF_DECLARE_DRIVER(ast2700_soc0, "aspeed,ast2700-scu0", ast2700_soc0_clk_init);
CLK_OF_DECLARE_DRIVER(ast2700_soc1, "aspeed,ast2700-scu1", ast2700_soc1_clk_init);
So I add these two.

>
> >        - const: syscon
> >        - const: simple-mfd
> >
> > @@ -30,10 +32,12 @@ properties:
> >    ranges: true
> >
> >    '#address-cells':
> > -    const: 1
> > +    minimum: 1
> > +    maximum: 2
> >
> >    '#size-cells':
> > -    const: 1
> > +    minimum: 1
> > +    maximum: 2
> >
> >    '#clock-cells':
> >      const: 1
> > @@ -56,6 +60,8 @@ patternProperties:
> >              - aspeed,ast2400-pinctrl
> >              - aspeed,ast2500-pinctrl
> >              - aspeed,ast2600-pinctrl
> > +            - aspeed,ast2700-soc0-pinctrl
> > +            - aspeed,ast2700-soc1-pinctrl
> >
> >      required:
> >        - compatible
> > @@ -76,6 +82,7 @@ patternProperties:
> >                - aspeed,ast2400-silicon-id
> >                - aspeed,ast2500-silicon-id
> >                - aspeed,ast2600-silicon-id
> > +              - aspeed,ast2700-silicon-id
> >            - const: aspeed,silicon-id
> >
> >        reg:
> > @@ -115,4 +122,24 @@ examples:
> >              reg = <0x7c 0x4>, <0x150 0x8>;
> >          };
> >      };
> > +  - |
> > +    soc0 {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
>
> That's the same example as previous, right? The drop, no need.

AST2700 is 64bits address mode platform, that the reason.
So I add example for 64bits platform descript in dtsi
I have to add soc0 to be address-cells and size-cells to be <2>
Then I can define the register to be 64bits address and size.
>
> Best regards,
> Krzysztof

************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!

DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.