[PATCH 1/3] usb: aspeed-vhub: add qualifier descriptor
Neal Liu
neal_liu at aspeedtech.com
Fri Nov 26 22:09:52 AEDT 2021
Support qualifier descriptor to pass USB30CV compliance test.
Signed-off-by: Neal Liu <neal_liu at aspeedtech.com>
---
drivers/usb/gadget/udc/aspeed-vhub/hub.c | 29 ++++++++++++++++++++---
drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 2 ++
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index b9960fdd8a51..d76f83bc7762 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -68,6 +68,18 @@ static const struct usb_device_descriptor ast_vhub_dev_desc = {
.bNumConfigurations = 1,
};
+static const struct usb_qualifier_descriptor ast_vhub_qual_desc = {
+ .bLength = 0xA,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+ .bcdUSB = cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_HUB,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ .bMaxPacketSize0 = 64,
+ .bNumConfigurations = 1,
+ .bRESERVED = 0,
+};
+
/*
* Configuration descriptor: same comments as above
* regarding handling USB1 mode.
@@ -271,9 +283,11 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc));
BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
break;
+ case USB_DT_OTHER_SPEED_CONFIG:
case USB_DT_CONFIG:
dsize = AST_VHUB_CONF_DESC_SIZE;
memcpy(ep->buf, &vhub->vhub_conf_desc, dsize);
+ ((u8 *)ep->buf)[1] = desc_type;
BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc));
BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
break;
@@ -283,6 +297,10 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc));
BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
break;
+ case USB_DT_DEVICE_QUALIFIER:
+ dsize = sizeof(vhub->vhub_qual_desc);
+ memcpy(ep->buf, &vhub->vhub_qual_desc, dsize);
+ break;
default:
return std_req_stall;
}
@@ -417,10 +435,9 @@ enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
/* GET/SET_CONFIGURATION */
case DeviceRequest | USB_REQ_GET_CONFIGURATION:
- return ast_vhub_simple_reply(ep, 1);
+ return ast_vhub_simple_reply(ep, vhub->current_config);
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
- if (wValue != 1)
- return std_req_stall;
+ vhub->current_config = wValue;
return std_req_complete;
/* GET_DESCRIPTOR */
@@ -428,6 +445,8 @@ enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
switch (wValue >> 8) {
case USB_DT_DEVICE:
case USB_DT_CONFIG:
+ case USB_DT_DEVICE_QUALIFIER:
+ case USB_DT_OTHER_SPEED_CONFIG:
return ast_vhub_rep_desc(ep, wValue >> 8,
wLength);
case USB_DT_STRING:
@@ -1033,6 +1052,10 @@ static int ast_vhub_init_desc(struct ast_vhub *vhub)
else
ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings);
+ /* Initialize vhub Qualifier Descriptor. */
+ memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc,
+ sizeof(vhub->vhub_qual_desc));
+
return ret;
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 87a5dea12d3c..e6a11a22422a 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -419,12 +419,14 @@ struct ast_vhub {
/* Upstream bus speed captured at bus reset */
unsigned int speed;
+ u8 current_config;
/* Standard USB Descriptors of the vhub. */
struct usb_device_descriptor vhub_dev_desc;
struct ast_vhub_full_cdesc vhub_conf_desc;
struct usb_hub_descriptor vhub_hub_desc;
struct list_head vhub_str_desc;
+ struct usb_qualifier_descriptor vhub_qual_desc;
};
/* Standard request handlers result codes */
--
2.25.1
More information about the Linux-aspeed
mailing list