[PATCH 3/4] drm/aspeed: Update INTR_STS handling

Joel Stanley joel at jms.id.au
Tue Nov 16 17:18:43 AEDT 2021


On Mon, 1 Nov 2021 at 11:01, tommy-huang <tommy_huang at aspeedtech.com> wrote:
>
>     The V-sync INTR_STS is differnet on AST2600.
>     Change into general rule to handle it.
>
> Signed-off-by: tommy-huang <tommy_huang at aspeedtech.com>
> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx.h     |  2 ++
>  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 26 ++++++++++++++++++++++---
>  2 files changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index 96501152bafa..5eed9275bce7 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -12,6 +12,8 @@ struct aspeed_gfx {
>         struct regmap                   *scu;
>
>         u32                             dac_reg;
> +       u32                             int_reg;
> +       u32                             int_clr_reg;
>         u32                             vga_scratch_reg;
>         u32                             throd_val;
>         u32                             scan_line_max;
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index b53fee6f1c17..1092060cb59c 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -60,6 +60,8 @@
>
>  struct aspeed_gfx_config {
>         u32 dac_reg;            /* DAC register in SCU */
> +       u32 int_status_reg;     /* Interrupt status register */

This is the same for all supported chips; do you need to introduce the
variable for it?

> +       u32 int_clear_reg;      /* Interrupt clear register */
>         u32 vga_scratch_reg;    /* VGA scratch register in SCU */
>         u32 throd_val;          /* Default Threshold Seting */
>         u32 scan_line_max;      /* Max memory size of one scan line */
> @@ -67,6 +69,8 @@ struct aspeed_gfx_config {
>
>  static const struct aspeed_gfx_config ast2400_config = {
>         .dac_reg = 0x2c,
> +       .int_status_reg = 0x60,
> +       .int_clear_reg = 0x60,
>         .vga_scratch_reg = 0x50,
>         .throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
>         .scan_line_max = 64,
> @@ -74,14 +78,26 @@ static const struct aspeed_gfx_config ast2400_config = {
>
>  static const struct aspeed_gfx_config ast2500_config = {
>         .dac_reg = 0x2c,
> +       .int_status_reg = 0x60,
> +       .int_clear_reg = 0x60,
>         .vga_scratch_reg = 0x50,
>         .throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
>         .scan_line_max = 128,
>  };
>
> +static const struct aspeed_gfx_config ast2600_config = {
> +       .dac_reg = 0xc0,
> +       .int_status_reg = 0x60,
> +       .int_clear_reg = 0x68,
> +       .vga_scratch_reg = 0x50,
> +       .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
> +       .scan_line_max = 128,
> +};

This patch combines adding the clear_reg functionality with support
for the 2600. Can you split them out; add int_clear_reg first, and
then add support for the 2600 in the following patch?


> +
>  static const struct of_device_id aspeed_gfx_match[] = {
>         { .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
>         { .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
> +       { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
>         { },
>  };
>  MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
> @@ -113,13 +129,15 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
>  {
>         struct drm_device *drm = data;
>         struct aspeed_gfx *priv = to_aspeed_gfx(drm);
> -       u32 reg;
> +       u32 reg, clr_reg;
>
> -       reg = readl(priv->base + CRT_CTRL1);
> +       reg = readl(priv->base + priv->int_reg);
>
>         if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
>                 drm_crtc_handle_vblank(&priv->pipe.crtc);
> -               writel(reg, priv->base + CRT_CTRL1);
> +               clr_reg = (readl(priv->base + priv->int_clr_reg) |
> +                       CRT_CTRL_VERTICAL_INTR_STS);
> +               writel(clr_reg, priv->base + priv->int_clr_reg);
You do not need to do read-modify-write.

On the 2500 you're writing back the value you read. On the 2600 all of
the bits are read only except the INTR_STS bit, which is W1C, so you
can use the value you read from CRT_CTRL1, so this should be enough:

 writel(reg, priv->base + priv->int_clr_reg);

>                 return IRQ_HANDLED;
>         }
>
> @@ -147,6 +165,8 @@ static int aspeed_gfx_load(struct drm_device *drm)
>         config = match->data;
>
>         priv->dac_reg = config->dac_reg;
> +       priv->int_reg = config->int_status_reg;
> +       priv->int_clr_reg = config->int_clear_reg;
>         priv->vga_scratch_reg = config->vga_scratch_reg;
>         priv->throd_val = config->throd_val;
>         priv->scan_line_max = config->scan_line_max;
> --
> 2.17.1
>


More information about the Linux-aspeed mailing list