[PATCH 3/4] drm/aspeed: Update INTR_STS handling

[tommy-huang]

    The V-sync INTR_STS is differnet on AST2600.
    Change into general rule to handle it.

Signed-off-by: tommy-huang <tommy_huang at aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx.h     |  2 ++
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 26 ++++++++++++++++++++++---
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 96501152bafa..5eed9275bce7 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -12,6 +12,8 @@ struct aspeed_gfx {
 	struct regmap			*scu;
 
 	u32				dac_reg;
+	u32				int_reg;
+	u32				int_clr_reg;
 	u32				vga_scratch_reg;
 	u32				throd_val;
 	u32				scan_line_max;
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..1092060cb59c 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -60,6 +60,8 @@
 
 struct aspeed_gfx_config {
 	u32 dac_reg;		/* DAC register in SCU */
+	u32 int_status_reg;	/* Interrupt status register */
+	u32 int_clear_reg;	/* Interrupt clear register */
 	u32 vga_scratch_reg;	/* VGA scratch register in SCU */
 	u32 throd_val;		/* Default Threshold Seting */
 	u32 scan_line_max;	/* Max memory size of one scan line */
@@ -67,6 +69,8 @@ struct aspeed_gfx_config {
 
 static const struct aspeed_gfx_config ast2400_config = {
 	.dac_reg = 0x2c,
+	.int_status_reg = 0x60,
+	.int_clear_reg = 0x60,
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
 	.scan_line_max = 64,
@@ -74,14 +78,26 @@ static const struct aspeed_gfx_config ast2400_config = {
 
 static const struct aspeed_gfx_config ast2500_config = {
 	.dac_reg = 0x2c,
+	.int_status_reg = 0x60,
+	.int_clear_reg = 0x60,
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
 	.scan_line_max = 128,
 };
 
+static const struct aspeed_gfx_config ast2600_config = {
+	.dac_reg = 0xc0,
+	.int_status_reg = 0x60,
+	.int_clear_reg = 0x68,
+	.vga_scratch_reg = 0x50,
+	.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+	.scan_line_max = 128,
+};
+
 static const struct of_device_id aspeed_gfx_match[] = {
 	{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
 	{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
@@ -113,13 +129,15 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 {
 	struct drm_device *drm = data;
 	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
-	u32 reg;
+	u32 reg, clr_reg;
 
-	reg = readl(priv->base + CRT_CTRL1);
+	reg = readl(priv->base + priv->int_reg);
 
 	if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
 		drm_crtc_handle_vblank(&priv->pipe.crtc);
-		writel(reg, priv->base + CRT_CTRL1);
+		clr_reg = (readl(priv->base + priv->int_clr_reg) |
+			CRT_CTRL_VERTICAL_INTR_STS);
+		writel(clr_reg, priv->base + priv->int_clr_reg);
 		return IRQ_HANDLED;
 	}
 
@@ -147,6 +165,8 @@ static int aspeed_gfx_load(struct drm_device *drm)
 	config = match->data;
 
 	priv->dac_reg = config->dac_reg;
+	priv->int_reg = config->int_status_reg;
+	priv->int_clr_reg = config->int_clear_reg;
 	priv->vga_scratch_reg = config->vga_scratch_reg;
 	priv->throd_val = config->throd_val;
 	priv->scan_line_max = config->scan_line_max;
-- 
2.17.1