[RFC PATCH 4/6] leds: pca955x: Use pinctrl to map GPIOs to pins

Andrew Jeffery andrew at aj.id.au
Wed Aug 11 10:19:05 AEST 2021



On Tue, 10 Aug 2021, at 23:24, Linus Walleij wrote:
> On Fri, Jul 23, 2021 at 9:59 AM Andrew Jeffery <andrew at aj.id.au> wrote:
> 
> > The leds-pca955x driver currently assumes that the GPIO numberspace and
> > the pin numberspace are the same. This quickly falls apart with a
> > devicetree binding such as the following:
> (...)
> 
> Honestly I do not understand this patch. It seems to implement a pin
> controller and using it in nonstandard ways.

Yeah, it's a bit abusive, hence RFC :)

> 
> If something implements the pin controller driver API it should be
> used as such IMO, externally. This seems to be using it do relay
> calls to itself which seems complicated, just invent something
> locally in the driver in that case? No need to use pin control?

Right. After discussions with Andy I'm going to rework the approach to 
GPIOs which will remove a lot of complexity.

The thought was to try to maintain the intent of the devicetree binding 
and use existing APIs, but all-in-all it's ended up twisting things up 
in knots a fair bit. We discard a lot of it by making the gpiochip 
always cover all pins and track use directly in the driver.

> 
> Can you explain why this LED driver needs to implement a pin
> controller?

The short answer is it doesn't as it has none of the associated 
hardware.

I'll cook up something simpler with the aim to avoid non-standard (or 
any) pinctrl.

Andrew


More information about the Linux-aspeed mailing list